Wraith MetalworksRaider
.458 Rifle / .45-70 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- Modular Length
- User Serviceable
- TBAC Summit Tested
length
5.7–8.4″
MSRP
$946
length
5.7–8.4″
calibers
.22 rimfire–.458
material
Titanium · Inconel
interface
HUB 1.375x24
MSRP
$946
- Overall length
- 8.4″
- Diameter
- 1.46″
- Class
- .458 Rifle / .45-70
- n
- 60
- Range
- 1.31″–2.5″
- Median
- 1.58″
- Material
- Ti-64 base tube / Inconel 718 baffles
- Finish / treatment
- Black, FDE, Bare
- Max caliber
- .46 Cal / .458
- Base interface
- HUB 1.375x24
- Front cap
- Removable
- Maintenance
- User serviceable
- MSRP
- $946
Narrower than most .458 Rifle / .45-70 suppressors
Diameter compared against the 60 .458 Rifle / .45-70 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: weight.
Configurations
- 5.7in SOCOM or Vane-ALPHA5.7″ · 10.3oz
- 6.6in SOCOM or Vane-ALPHA6.6″ · 12.4oz
- 7.5in SOCOM or Vane-ALPHA7.5″ · 14.6oz
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Removable
The HUB 1.375x24 is an open standard: 489 mounts and 934 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Raider was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Built around one of four Core Calibers (.223, .308, .357 and .458); each Core Caliber baffle stack supports a family of cartridges rather than a single one.
- Baffles and complete Wraith Baffle Stacks are interchangeable across Sentinel, Ambush and Raider; base tubes, extensions and end caps are model-specific and do not swap between models.
- Fully user-serviceable: individual baffles, tubes, extensions and end caps can all be disassembled, cleaned, inspected and reassembled.
- Clean components in an ultrasonic cleaner or with a suppressor-safe solution, and reapply Wraith Suppressor Lubricant to each baffle before reassembly.
Show all 17 ▾ ▴
- Additional Baffle Stacks in other Core Calibers can currently only be added at the time a new suppressor is purchased.
- Made by additive manufacturing, which Wraith says enables internal geometries that traditional machining cannot produce.
- Direct-core design with no outer-tube gas management: the baffle stack does the work, making Raider the lightest and simplest Wraith suppressor.
- Available with either a HUB Bravo or HUB Alpha mounting interface, depending on configuration.
- Available lengths 5.7, 6.6, 7.5 and 8.4 inches, weighing 8.3 to 14.6 oz depending on configuration; 1.456 in diameter.
- End caps are model-specific and caliber-specific, with a hex opening sized per Core Caliber: 7mm for .223, 9mm for .308, 10mm for .357, 13mm for .458.
- Comes standard with a Ti-64 base tube and Inconel 718 baffles; optional Wraith Hyper Alloys are WrTi-27 (ultra lightweight) and WrNi-21 (maximum durability and thermal resistance, aimed at belt-fed, full-auto and high-volume use).
- Backed by a Limited Lifetime Warranty covering defects in materials and workmanship; many claims can be resolved by replacing only the affected baffle, extension or end cap.
- Aimed at pistols and handguns, PCCs and compact rifles, and lightweight builds.
- The Raider SOCOM-6.6 is aimed at lightweight AR builds, AR pistols, SBRs and compact truck guns.
- One HUB adapter is included with each suppressor; additional adapters are sold separately.
- Wraith says never to fire the suppressor unless the selected Core Caliber is appropriate for the cartridge being fired.
- Wraith recommends a maximum assembled suppressor length of 11 inches.
