US PalmEOS-AK
.30 Cal / 7.62mm suppressor · M14x1LH Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Low Backpressure
- No Barrel Restrictions
- Full-Auto Rated
- Direct Thread
length
7.5″
weight
15.4oz
MSRP
$900
length
7.5″
weight
15.4oz
calibers
5.56–.30
material
Inconel
interface
M14x1LH Direct Thread
MSRP
$900
- Overall length
- 7.5″
- Diameter
- 1.6″
- Weight
- 15.4 oz
- Material
- 718 Inconel
- Max caliber
- 7.62x54R
- Base interface
- M14x1LH Direct Thread
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- MSRP
- $900
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: M14x1LH Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- Published specifications: 7.62x39mm caliber, 718 Inconel material, 1.6" diameter, 7.5" overall length, 15.4 oz weight, maximum caliber rating 7.62x54R.
- Warranted against defects in materials and workmanship for the serviceable life of the product. If US Palm cannot repair the suppressor, they will replace it with a suppressor in equal or better physical condition.
- One of the quietest AK-specific suppressors available, built for hard use without compromise.
- Low back pressure design.
Show all 16 ▾ ▴
- Integrated flash hider.
- 15.4oz weight.
- Collet system optimized for AKM mounting (14x1LH).
- Optimized specifically for AKM pattern rifles and pistols. It features a 14x1mm direct thread mounting pattern with a retention collar designed to retain the suppressor under heavy firing schedules.
- Installation: tighten the locking collar to the suppressor until it stops, back it off one full turn, thread the suppressor onto the host firearm, engage the AKM detent, hand tighten firmly, then tighten the 3mm hex key on the locking collar.
- Durable 3D printed 718 Inconel construction.
- Passes the SOCOM stress test for durability.
- 718 Inconel will regularly operate in excess of 1300°F and can tolerate temperatures of up to 1800°F for short periods. Extended usage in the upper temperature ranges can lead to early baffle erosion.
- Purpose-built for AKM rifles: mounts directly to standard 14x1LH threads and delivers exceptional suppression with rugged Inconel construction.
- The specification table lists no full auto restriction and no barrel length restriction.
- Perform inspection and cleaning approximately every 1000 rounds. Abnormal environmental conditions including exposure to rain, mud, sand, or saltwater will necessitate more frequent inspection and maintenance.
- Frangible ammunition can increase the risk of a baffle strike and is not recommended for use with suppressors. Unjacketed lead ammunition can cause lead buildup over time, reducing suppressor effectivity and leading to a potential baffle strike.