US PalmEOS-30Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- Multi-Caliber
- No Barrel Restrictions
length
7.3″
weight
10.8oz
MSRP
$1,000
length
7.3″
weight
10.8oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$1,000
- Overall length
- 7.3″
- Diameter
- 2″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 1.36″–2.74″
- Median
- 1.63″
- Weight
- 10.8 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium
- Max caliber
- .300 Win Mag
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Low
- Barrel restriction
- None (manufacturer stated)
- MSRP
- $1,000
Wider than most .30 Cal / 7.62mm suppressors
Diameter compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including US Palm EOS Titanium HUB Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Published specifications: 7.62x51mm caliber, titanium material, 2" diameter, 7.3" overall length, 10.8 oz weight, maximum caliber rating 300 Win. Magnum.
- Warranted against defects in materials and workmanship for the serviceable life of the product. If US Palm cannot repair the suppressor, they will replace it with a suppressor in equal or better physical condition.
- Suppression without traditional baffles.
- High volume titanium suppressor optimized for semi-auto 300BLK.
Show all 15 ▾ ▴
- Low back pressure design.
- Integrated flash hider.
- 10.8oz weight.
- HUB utilizes a 1.375x24 thread pitch machined into the body of the suppressor. The HUB system allows for a variety of mounting options including both direct thread and quick-detach mounts.
- Insert the HUB compatible direct thread mount into the HUB compatible body of the suppressor and tighten it to approximately 30 ft-lbs using appropriately sized wrenches.
- 3D printed titanium design.
- Optimized for .300 BLK and designed to maximize sound suppression while remaining low back pressure. Its lightweight titanium construction makes it ideal for both AR platforms and hunting applications.
- HUB compatible and includes a titanium DT 5/8x24 mount.
- The specification table lists a full auto restriction of 300BLK subsonic, and no barrel length restriction.
- Perform inspection and cleaning approximately every 1000 rounds. Abnormal environmental conditions including exposure to rain, mud, sand, or saltwater will necessitate more frequent inspection and maintenance.
- Frangible ammunition can increase the risk of a baffle strike and is not recommended for use with suppressors. Unjacketed lead ammunition can cause lead buildup over time, reducing suppressor effectivity and leading to a potential baffle strike.