US PalmEOS-30
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- Multi-Caliber
- No Barrel Restrictions
- Full-Auto Rated
length
6.5″
weight
14.7oz
MSRP
$900
length
6.5″
weight
14.7oz
calibers
5.56–.30
material
Inconel
interface
HUB 1.375x24
MSRP
$900
- Overall length
- 6.5″
- Diameter
- 1.6″
- Weight
- 14.7 oz
- Material
- 718 Inconel
- Max caliber
- .300 Win Mag
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- MSRP
- $900
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including US Palm EOS Titanium HUB Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Published specifications: 7.62x51mm caliber, 718 Inconel material, 1.6" diameter, 6.5" overall length, 14.7 oz weight, maximum caliber rating 300 Win. Magnum.
- Warranted against defects in materials and workmanship for the serviceable life of the product. If US Palm cannot repair the suppressor, they will replace it with a suppressor in equal or better physical condition.
- Setting the standard for general-purpose .30 caliber suppressors.
- Low back pressure design.
Show all 16 ▾ ▴
- Integrated flash hider.
- 14.7oz weight.
- HUB utilizes a 1.375x24 thread pitch machined into the body of the suppressor. The HUB system allows for a variety of mounting options including both direct thread and quick-detach mounts.
- Insert the HUB compatible direct thread mount into the HUB compatible body of the suppressor and tighten it to approximately 30 ft-lbs using appropriately sized wrenches.
- Durable 3D printed 718 Inconel construction.
- Passes the SOCOM stress test for durability.
- 718 Inconel will regularly operate in excess of 1300°F and can tolerate temperatures of up to 1800°F for short periods. Extended usage in the upper temperature ranges can lead to early baffle erosion.
- Engineered for 7.62 platforms, balancing durability, size and suppression.
- HUB compatible and includes a titanium DT 5/8x24 mount.
- The specification table lists no full auto restriction and no barrel length restriction.
- Perform inspection and cleaning approximately every 1000 rounds. Abnormal environmental conditions including exposure to rain, mud, sand, or saltwater will necessitate more frequent inspection and maintenance.
- Frangible ammunition can increase the risk of a baffle strike and is not recommended for use with suppressors. Unjacketed lead ammunition can cause lead buildup over time, reducing suppressor effectivity and leading to a potential baffle strike.