Unknown SuppressorsReaper
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
length
6″
weight
8.8oz
MSRP
$999
length
6″
weight
8.8oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$999
- Overall length
- 6″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.8″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 1.36″–2.74″
- Median
- 1.63″
- Weight
- 8.8 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Grade 23 Titanium
- Finish / treatment
- Cerakote C-Series, Black, FDE, OD Green, Sniper Grey
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Unknown Suppressors 1.58x24
- Full-auto rated
- No
- Firing schedule
- Titanium can be subject to strength loss at high heat. We recommend keeping your titanium suppressor below 800 degrees. There are no barrel restrictions for standard bolt face cartridges. For short action magnum we recommend 16 inches or longer. For long action magnum we recommend 18 inches or longer.
- MSRP
- $999
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Wider than most .30 Cal / 7.62mm suppressors
Diameter compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Unknown Suppressors 1.58x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Unknown Suppressors Hub/Bravo Adapter Direct Thread (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Measures 127 dB at the shooter’s ear, shot out of a 20-inch .308 firing M118 ammunition.
- Light and unbearably quiet. Eerie even. 3D Printed from Titanium, the Reaper is as strong as it gets with no welds and no weakpoints. Both ends are threaded, HUB for attachment, and the same threads as the OG L for the end cap.
- Coming in at 8.8 ounces, the Reaper doesn’t add much to your overall weight, however, your rifle’s big booms will be more like pleasant yawns, quiet and demure.
- Printed in one-piece from Grade 23 Titanium, 6 inches long, 1.8 inch diameter, 8.8 ounces ( 7.9 without adapter ), fully muzzle forward, HUB Threading for versatile mounting (1.375×24).
Show all 10 ▾ ▴
- Endcap 1.58 / 24 threading (.30 cal / 6.5mm endcaps available).
- Finish: C Series Cerakote (only heat treated for Raw & Bead Blasted).
- Included: Suppressor, DLC direct thread adapter, customer’s choice of .30 cal or 6.5 mm endcap.
- Titanium can be subject to strength loss at high heat. We recommend keeping your titanium suppressor below 800 degrees.
- There are no barrel restrictions for standard bolt face cartridges. For short action magnum we recommend 16 inches or longer. For long action magnum we recommend 18 inches or longer.
- Keep under 800 °F at all times. No barrel length restrictions for standard boltface cartridges. Short Action Magnum – 16″, Long Action Magnum or 300 Norma – 20″.