Unknown SuppressorsOG 6.5
6mm / 6.5mm suppressor · 5/8x24 Over-Barrel interface · specs and compatibility from the manufacturer
Notable features
- Sealed
length
8″
weight
7.4oz
MSRP
$999
length
8″
weight
7.4oz
calibers
5.56 | 6.5
material
Titanium
interface
5/8x24 Over-Barrel
MSRP
$999
- Overall length
- 8″
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 3″–9.7″
- Median
- 6.2″
- Diameter
- 1.55″
- Weight
- 7.4 oz
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 4.4 oz–23.9 oz
- Median
- 12.45 oz
- Material
- Grade 23 Titanium
- Finish / treatment
- Black, FDE, OD Green, Sniper Grey
- Max caliber
- 6.5mm / .264
- Base interface
- 5/8x24 Over-Barrel
- Front cap
- Fixed
- Full-auto rated
- No
- Firing schedule
- Titanium can be subject to strength loss at high heat. We recommend keeping your titanium suppressor below 800 degrees. There are no barrel restrictions for standard bolt face cartridges. For short action magnum we recommend 16 inches or longer. For long action magnum we recommend 18 inches or longer.
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $999
Longer than most 6mm / 6.5mm suppressors
Length compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 6mm / 6.5mm suppressors
Weight compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Over-Barrel. Nothing in the catalog attaches to it yet; check with the manufacturer for the hardware it takes.
Manufacturer claim
- Measures 129.5 dBA at the shooter’s ear, shot out of a 24-inch 6.5 Creedmoor firing Hornady 140 ELDM ammunition.
- The OG makes rifles quiet and sound better. For most suppressors, bore size does not have a noticeable effect on suppression levels when a smaller caliber bullet is shot through it. But we have found that our 6.5 mm OG performed better than the .30 Caliber version on 6.5 mm and smaller cartridges. Turns out that for reflex suppressors, matching the bore size to the caliber does have quite the effect on sound suppression!
- 8” long by 1.55” wide, 7.4 ounces, 4” around the barrel and 4” in front of the muzzle.
- 5/8-24 direct threads (1/2-28 adapter available).
Show all 8 ▾ ▴
- Printed from Grade 23 Titanium, one solid piece of material.
- Up to .750” diameter barrels (tapers to 0.830 inches at bottom).
- Titanium can be subject to strength loss at high heat. We recommend keeping your titanium suppressor below 800 degrees.
- There are no barrel restrictions for standard bolt face cartridges. For short action magnum we recommend 16 inches or longer. For long action magnum we recommend 18 inches or longer.