TBACSPIRO 243
6mm / 6.5mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Low Backpressure
- TBAC Summit Tested
- Haynes 282
- Full-Auto Rated
- Direct Thread
length
5.9″
weight
15.5oz
MSRP
$995
length
5.9″
weight
15.5oz
calibers
5.56 | 6.5
material
Haynes 282
interface
5/8x24 Direct Thread
MSRP
$995
- Overall length
- 5.9″
- Diameter
- 1.8″
- Class
- 6mm / 6.5mm
- n
- 116
- Range
- 1.44″–1.83″
- Median
- 1.62″
- Weight
- 15.5 oz
- Material
- Haynes 282
- Finish / treatment
- Cerakote
- Max caliber
- .243 Cal / 6mm
- Base interface
- 5/8x24 Direct Thread
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- 12.5" minimum
- Minimum barrel lengths for SPIRO 6mm/.243: any barrel length for 4.6x30 HK and 5.7 FN; 8" for .223, 5.56mm, 5.45 Russian; 12.5" for 22 ARC, 224 Valkyrie, 6 ARC; 18.0" for .22-250, 22 Creedmoor, .243WIN, 6 Creedmoor, 6GT. These are the ratings at maximum operating temperature; TBAC says shorter barrels may work if temperature is controlled.
- Firing schedule
- Hard-Use/Full-Auto Mod 1 (HU/FA/1): lifetime to exceed at least 20 SOCOM/SURG cycles on an 8.0" Mk18-style AR (the upper and muzzle device will likely not survive the whole trial)
- MSRP
- $995
Wider than most 6mm / 6.5mm suppressors
Diameter compared against the 116 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 5/8x24 Direct Thread
- Front cap
- Fixed
This suppressor threads straight onto the barrel, so no mount is required. 7 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. SPIRO 243 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The SPIRO only increases the cyclic rate of an Mk18 by about 5% (compared to 43% for a Dominus-SR; most LBP 3%-10%).
- This is while keeping Shooter's Ear peak dBA at 137.7 (LEq dBA 124.9), and milspec-left muzzle position 138.2 dBA (LEq dBA 124.4).
- No longer do you have to compromise and have your gas gun suppressor be "Low back pressure but loud at the muzzle." The 5.56 SPIRO increases back pressure gas flow by only approximately 50% compared to a bare muzzle (most LBP are 35-85%), which is 3X less gas than a Dominus-SR.
- Mounts: Direct Thread 1/2-28 (DT) -- for .223 Direct Thread 5/8-24 (DT) -- for .243 HUB (1.6" from TE to first baffle) * no mount included with HUB version SR v2.
Show all 9 ▾ ▴
- Low Back Pressure Gas Gun Suppressor Extreme Duty/Full-Auto Dedicated versions for 5.56mm; 6mm (6ARC) Available in SR (v2) mount, Direct Thread, and HUB The SPIRO is a low back pressure gas-gun suppressor that has excellent sound suppression levels at both the muzzle and at shooter's ear .
- Finish: Black CeraKote.
- Brake material: Haynes 282.
- Rated Hard-Use/Full-Auto Mod 1 [HU/FA/1]: lifetime to exceed at least 20 SURG cycles on an 8.0" Mk18 style AR, versus 10 cycles on a 10.5" barrel for the other TBAC full-auto rated suppressors. The upper and muzzle device will likely not survive the entire trial.
- Minimum barrel lengths for SPIRO 6mm/.243: any barrel length for 4.6x30 HK and 5.7 FN; 8" for .223, 5.56mm, 5.45 Russian; 12.5" for 22 ARC, 224 Valkyrie, 6 ARC; 18.0" for .22-250, 22 Creedmoor, .243WIN, 6 Creedmoor, 6GT. These are the ratings at maximum operating temperature; TBAC says shorter barrels may work if temperature is controlled.
