T&K SuppressorsVORIX 30 Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- Multi-Caliber
- PEW Science Reviewed
- TBAC Summit Tested
length
7.5″
weight
11.3oz
MSRP
$999
length
7.5″
weight
11.3oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$999
- Overall length
- 7.5″
- Diameter
- 1.5″
- Weight
- 11.3 oz
- Material
- 3D Printed Titanium
- Finish / treatment
- DLC Coating
- Max caliber
- .300 Win Mag
- Base interface
- HUB 1.375x24
- Full-auto rated
- No
- Barrel restriction
- 14.5" minimum
- Rated for .30-caliber projectiles and smaller, including but not limited to .300 Win Mag, .308 Win / 7.62x51, 6.5 Creedmoor, 6.5 PRC, 6mm Creedmoor and .243 Win. Magnum and high-pressure cartridges are subject to barrel length restrictions.
- Minimum Barrel Length: 14.5 inches.
- MSRP
- $999
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 489 mounts and 934 muzzle devices in our catalog fit this suppressor, including T&K Suppressors Titanium Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. VORIX 30 Ti was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
- .300 Blackout subsonic, 16" bolt-action rifle 2026124.2 dBat the ear · 25.5 dB quieter than the 2025 unsuppressed baseline55 tested →
- .308, 20" bolt-action rifle 2026128.7 dBat the ear · 27.2 dB quieter than the 2024 unsuppressed baseline50 tested →
- .300 Win Mag, 26" bolt-action rifle 2026132.2 dBat the ear · 24.9 dB quieter than the 2025 unsuppressed baseline38 tested →
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- Every T & K Suppressor is backed by our Lifetime Warranty for the original owner.
- No suppressor under 8.4 inches and under 18 ounces has achieved a higher PEW Science suppression rating.
- Compared to the ALTUS, the VORIX has more length, more internal volume, and more stages to manage pressure. That allows it to hold gas longer and let it decay properly.
- Key Specs: Length: 7.5", Diameter: 1.5", Weight: 11.3 oz, Material: 3D Printed Titanium + DLC Coating, Rear Interface: 1.375x24 HUB (Bravo), Full Auto Rated: No.
Show all 12 ▾ ▴
- Fully additive titanium. No welds, no stacked tolerances, internal geometry you can't get with traditional manufacturing.
- Purpose-built for bolt-action platforms — optimized for supersonic .308 and .300 BLK subsonic performance, with strong results across .30 caliber and smaller cartridges. Rated for magnum rifle cartridges.
- Direct Thread Mount (Included): 1/2"X28 or 5/8"X24.
- This is not a hard-use, full-auto suppressor. It's built for bolt guns, hunting rifles, precision setups and moderate semi-auto use (subsonic).
- Due to the short blast chamber, the VORIX and ALTUS are not full auto rated.
- Rated for .30-caliber projectiles and smaller, including but not limited to .300 Win Mag, .308 Win / 7.62x51, 6.5 Creedmoor, 6.5 PRC, 6mm Creedmoor and .243 Win. Magnum and high-pressure cartridges are subject to barrel length restrictions.
- Minimum Barrel Length: 14.5 inches.
- Third-party HUB-compatible mounts must not exceed 1.65 inches in length measured from the top of the HUB interface threads.
