T&K SuppressorsHAVIC 6MM Ti
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- TBAC Summit Tested
- Full-Auto Rated
length
5.75″
weight
9.6oz
MSRP
$899
length
5.75″
weight
9.6oz
calibers
5.56 | 6.5
material
Titanium
interface
HUB 1.375x24
MSRP
$899
- Overall length
- 5.75″
- Diameter
- 1.62″
- Weight
- 9.6 oz
- Class
- 6mm / 6.5mm
- n
- 123
- Range
- 4.4 oz–23.9 oz
- Median
- 12.7 oz
- Material
- 3D Printed Titanium
- Finish / treatment
- Cerakote
- Max caliber
- 6mm
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Barrel restriction
- 10.3" minimum
- Minimum Barrel Length: 10.3 inches.
- Firing schedule
- 90 rounds with 10 minute cool down
- MSRP
- $899
Lighter than most 6mm / 6.5mm suppressors
Weight compared against the 123 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 489 mounts and 934 muzzle devices in our catalog fit this suppressor, including T&K Suppressors Titanium Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. HAVIC 6MM Ti was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Every T & K Suppressor is backed by our Lifetime Warranty for the original owner.
- At the core of the HAVIC is our Radial Vector Diffusion system. Instead of dumping all the pressure in one spot like a traditional design, we break it up and move it outward into the suppressor body while still keeping things moving forward.
- Radial Vector Diffusion keeps muzzle signature down, reduces blowback, and makes every shot feel the same.
- Key Specs: Length: 5.75", Weight: 9.6 oz, Material: 3D Printed Titanium + Cerakote, Rear Interface: 1.375x24 HUB (Bravo), Full Auto Rated: Yes.
Show all 15 ▾ ▴
- HAVIC specifications: Material: Titanium or Inconel. Weight: 9.7 oz (Titanium) - 16 oz (Inconel). Length: 5.75 inches. Diameter: 1.62 inches. Rear Interface: 1.375x24 HUB (Bravo).
- High-Temp Cerakote Finish. Built to take heat and keep going.
- We use full additive titanium construction. No welds. No stacked tolerances. No shortcuts.
- Hard-Use Rated: handles aggressive firing schedules without falling apart or falling off.
- It's rated for full-auto firing schedules: up to 90 rounds with a 10-minute cool down.
- The HAVIC was designed specifically around 5.56 and 6MM platforms. It manages pressure the way a gas gun actually needs it managed.
- Purpose-built for 5.56 and 6mm platforms — optimized for consistent performance across 10.3"–16" barrels, featuring minimized first-round pop, balanced gas behavior, strong muzzle signature control, and a deep, refined tone that softens the perceived impulse of each shot.
- What this is for: running carbines hard, training environments, duty use, consistency and control out of a gas gun, lightweight hunting setups.
- Direct Thread Mount (Included): 1/2"X28 or 5/8X24.
- Rated for 6MM projectiles and smaller, including but not limited to 6MM Creedmor, 6MM ARC, .243 Winchester, 5.56 / .223, .224 Valkyrie and .22-250.
- Minimum Barrel Length: 10.3 inches.
