T&K SuppressorsHAVIC 6MB Inconel
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- Full-Auto Rated
length
5.75″
weight
18oz
MSRP
$899
length
5.75″
weight
18oz
calibers
5.56 | 6.5
material
Inconel
interface
HUB 1.375x24
MSRP
$899
- Overall length
- 5.75″
- Diameter
- 1.75″
- Weight
- 18 oz
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 4.4 oz–23.9 oz
- Median
- 12.45 oz
- Material
- 3D Printed Inconel
- Finish / treatment
- Cerakote
- Max caliber
- 6mm
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Barrel restriction
- 10.3" minimum
- MSRP
- $899
Heavier than most 6mm / 6.5mm suppressors
Weight compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including T&K Suppressors Titanium Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Every T & K Suppressor is backed by our Lifetime Warranty for the original owner.
- At the core of the HAVIC is our Radial Vector Diffusion system. Instead of dumping all the pressure in one spot like a traditional design, we break it up and move it outward into the suppressor body while still keeping things moving forward.
- Radial Vector Diffusion keeps muzzle signature down, reduces blowback, and makes every shot feel the same.
- BREACH adds integrated glass-break spikes to the standard HAVIC — no changes to performance, significant weight, or internal design.
Show all 15 ▾ ▴
- Key Specs: Length: 5.75", Diameter: 1.75", Weight: 18 oz, Material: 3D Printed Inconel + Cerakote, Rear Interface: 1.375x24 HUB (Bravo), Full Auto Rated: Yes.
- High-Temp Cerakote Finish. Built to take heat and keep going.
- We use full additive Inconel construction. No welds. No stacked tolerances. No shortcuts.
- Hard-Use Rated: handles aggressive firing schedules without falling apart or falling off.
- This is not a "couple shots and let it cool" suppressor. It's rated for full-auto firing schedules.
- The HAVIC was designed specifically around 5.56 and 6MM platforms. It manages pressure the way a gas gun actually needs it managed.
- Purpose-built for 5.56 and 6mm platforms — optimized for consistent performance across 10.3"–16" barrels, featuring minimized first-round pop, balanced gas behavior, strong muzzle signature control, and a deep, refined tone that softens the perceived impulse of each shot.
- What this is for: running carbines hard, training environments, duty use, consistency and control out of a gas gun, lightweight hunting setups.
- Direct Thread Mount (Included): 1/2"X28 or 5/8"X24.
- Rated for 6MM projectiles and smaller, including but not limited to 6MM Creedmor, 6MM ARC, .243 Winchester, 5.56 / .223, .224 Valkyrie and .22-250.
- Minimum Barrel Length: 10.3 inches.