T&K SuppressorsALTUS 30 Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
length
5.75″
weight
7.3oz
MSRP
$799
length
5.75″
weight
7.3oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$799
- Overall length
- 5.75″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.5″
- Weight
- 7.3 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- 3D Printed Titanium
- Finish / treatment
- DLC Coating
- Max caliber
- .300 Win Mag
- Base interface
- HUB 1.375x24
- Full-auto rated
- No
- Barrel restriction
- 14.5" minimum
- MSRP
- $799
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including T&K Suppressors Titanium Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The ALTUS is rated up to magnum cartridges, so you can run it across different setups without needing a dedicated can for everything.
- Every T & K Suppressor is backed by our Lifetime Warranty for the original owner.
- Key Specs: Length: 5.75", Diameter: 1.5", Weight: 7.3 oz, Material: 3D Printed Titanium + DLC Coating, Rear Interface: 1.375x24 HUB (Bravo), Full Auto Rated: No.
- Fully additive titanium. No welds, no stacked tolerances, internal geometry you can't get with traditional manufacturing.
Show all 11 ▾ ▴
- Purpose-built for bolt-action platforms — optimized for supersonic .308 and .300 BLK subsonic performance, with strong results across .30 caliber and smaller cartridges. Rated for magnum rifle cartridges.
- Built for bolt action and semi auto subsonic rifles. 5.75" length, 7.3 oz weight, 1.5" diameter. It doesn't turn your rifle into something front-heavy or awkward to carry.
- Direct Thread Mount (Included): 1/2"X28 or 5/8"X24.
- This is not a hard-use suppressor. It's built for hunting rifles, bolt guns, semi auto subsonic and lightweight setups.
- Due to the short blast chamber, the VORIX and ALTUS are not full auto rated.
- Rated for .30-caliber projectiles and smaller, including but not limited to .300 Win Mag, .308 Win / 7.62x51, 6.5 Creedmoor, 6.5 PRC, 6mm Creedmoor and .243 Win. Magnum and high-pressure cartridges are subject to barrel length restrictions.
- Minimum Barrel Length: 14.5 inches.