StingerWorxVenom 338
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- User Serviceable
length
10″
weight
17oz
MSRP
$1,249
length
10″
weight
17oz
calibers
.338+
material
Titanium · Aluminum
interface
HUB 1.375x24
MSRP
$1,249
- Overall length
- 10″
- Diameter
- 1.75″
- Weight
- 17 oz
- Material
- Titanium (Mount & Blast Chamber) + 7075 Aluminum (Body & Stack)
- Finish / treatment
- Type III Hard Coat Anodized
- Max caliber
- .338 Cal
- Base interface
- HUB 1.375x24
- Front cap
- StingerWorx MDS
- Full-auto rated
- No
- Maintenance
- User serviceable
- MSRP
- $1,249
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- StingerWorx MDS
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including StingerWorx HUB to Direct Thread Mount 1/2x28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Features a modular extension chamber that increases internal blast volume for added suppression or length adjustment: take the extension out for light weight and maneuverability, or leave it in for maximum suppression.
- Dual Path Suppression Technology splits expanding gases into two separate pressure zones, reducing peak blast pressure and optimizing sound suppression.
- Built with the industry-standard 1.375x24 TPI HUB interface.
- Swap the included flat cap for a Flash Hider for up to 75% more flash reduction than the suppressor alone, or for a Suppressor Brake for added recoil management.
Show all 10 ▾ ▴
- User serviceable: with the StingerWorx Universal Clamp and basic tools like a crescent wrench, shooters can disassemble, clean and reassemble the suppressor in minutes, and worn components can be replaced or upgraded.
- Combines a titanium blast chamber and blast baffles with a Type III hard anodized 7075 aluminum tube and secondary baffles.
- At just 10 inches and 17 ounces it is one of the lightest .338 suppressors available.
- Includes a Modular Device System lock ring and standard flat end cap, a HUB Compatible 5/8-24 mount or HUB to Emperor Mount for use with the Emperor Muzzle Brake (sold separately), and the expansion chamber.
- Calibers: 338 Caliber and smaller, optimized for .338 Lapua and .338 Win Mag.
- Full Auto Rated: No.