StingerWorxEVO Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- Sealed
length
8″
weight
11.2oz
MSRP
$1,149
length
8″
weight
11.2oz
calibers
5.56–9mm
material
Titanium
interface
HUB 1.375x24
MSRP
$1,149
- Overall length
- 8″
- Diameter
- 1.65″
- Weight
- 11.2 oz
- Material
- 6AL-4V Titanium (3D Printed)
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- StingerWorx MDS
- Full-auto rated
- No
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $1,149
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- StingerWorx MDS
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including StingerWorx HUB to Direct Thread Mount 1/2x28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The EVO Ti integrates 3D printed baffles and tube into a single, seamless structure for maximum strength, then pairs it with a precision machined titanium blast chamber.
- Dual Path architecture splits expanding gases into two separate pressure zones, reducing peak blast pressure and optimizing sound suppression.
- Features 1.375x24 TPI HUB threading, making it compatible with a wide range of mounting solutions.
- Accepts StingerWorx Modular Device System inserts, allowing for a flash hider, brake, diffusor, or standard flat cap configurations to tailor recoil and signature management.
Show all 10 ▾ ▴
- The EVO Ti's internals are sealed due to its monolithic 3D printed design. Monitor for carbon buildup by tracking weight change: when the suppressor gains approximately 2 oz, clean it in an ultrasonic cleaner and treat with Seal 1.
- Engineered from aerospace grade 6AL-4V titanium.
- Built to survive SOCOM's punishing fire tables without compromise, whether running a gas gun at high cyclic rates or working in demanding environments.
- Includes a Modular Device System lock ring and standard flat end cap; a HUB Compatible mount (1/2-28 and 5/8-24 Direct Thread) or HUB to Emperor mount for use with the Emperor Brake; and a StingerWorx Range Case, a lockable 6x11x11in range case with custom cut foam.
- Calibers: .223, .308, 9mm.
- Full Auto Rated: No.