StingerWorxEVO Hunter 30
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- User Serviceable
length
8″
weight
9.2oz
MSRP
$749
length
8″
weight
9.2oz
calibers
5.56–.30
material
Titanium · Aluminum
interface
HUB 1.375x24
MSRP
$749
- Overall length
- 8″
- Diameter
- 1.65″
- Weight
- 9.2 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium (Blast Chamber, Mount, Blast Baffle) + 7075 Aluminum (Body & Stack)
- Max caliber
- .300 Win Mag
- Base interface
- HUB 1.375x24
- Front cap
- StingerWorx MDS
- Full-auto rated
- No
- Barrel restriction
- 10" minimum
- Maintenance
- User serviceable
- MSRP
- $749
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- StingerWorx MDS
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including StingerWorx HUB to Direct Thread Mount 1/2x28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Dual Path architecture splits expanding gases into two separate pressure zones, reducing peak blast pressure and optimizing sound suppression.
- Features industry standard 1.375x24 TPI HUB threading, so it runs on the StingerWorx Emperor Brake, StingerWorx HUB-compatible direct mounts, or third party HUB systems.
- Baffle system: threaded and replaceable multi-material baffle stack.
- Fully serviceable: threaded, replaceable baffle stacks and tool features allow shooters to disassemble, clean, inspect and reassemble with standard tools or the StingerWorx Universal Suppressor Clamp system.
Show all 11 ▾ ▴
- Hybrid construction: a titanium blast chamber, blast baffle and mount for strength in the hottest, highest pressure zones, paired with a 7075 aluminum tube and baffle stack to reduce weight.
- In the case of a baffle strike the suppressor can be returned to StingerWorx for evaluation and, if possible, the front half rebuilt for a fee. This preserves the serialized blast chamber, so no additional ATF paperwork or tax stamp is needed to get it running again.
- Weigh the suppressor on receipt, then disassemble and clean it after it has gained 1oz of carbon build up.
- At just over 9 ounces it is one of the lightest multi-caliber suppressors available, suited to bolt guns for long hunts, mountain treks, and low rate of fire range shooting.
- Includes a Modular Device System lock ring and standard flat end cap, plus a HUB to 5/8-24 mount or a HUB to Emperor mount for use with the Emperor Muzzle Brake.
- Full Auto Rated: No.
- EVO Hunter - 30 (Multi-Caliber) calibers and minimum barrel lengths: 5.56x45 / .223 from 10 inches; 6.8 SPC, 7.62x51 and .308 from 12 inches; 300 Win from 18 inches.