Stealth ProjectMaverick QD 5.56
5.56mm / .223 suppressor · Stealth Project 5.56 Taper interface · specs and compatibility from the manufacturer
Notable features
- Multi-Caliber
- User Serviceable
length
6.55″
weight
12.5oz
MSRP
$1,300
length
6.55″
weight
12.5oz
calibers
5.56
material
Titanium
interface
Stealth Project 5.56 Taper
MSRP
$1,300
- Overall length
- 6.55″
- Diameter
- 1.5″
- Weight
- 12.5 oz
- Material
- Titanium
- Finish / treatment
- Black, Flat Dark Earth, Battleworn
- Max caliber
- 5.56mm / .223
- Base interface
- Stealth Project 5.56 Taper
- Barrel restriction
- 10" minimum
- Maintenance
- User serviceable
- MSRP
- $1,300
- Class
- 5.56mm / .223
- n
- 292
- Range
- $199–$1,955
- Median
- $899
Pricier than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · $1,300
$199$1,955
MSRP compared against the 292 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- Stealth Project 5.56 Taper
This suppressor's Stealth Project 5.56 Taper takes no separate mount. 1 muzzle device in our catalog attach to it directly.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The Maverick Series is rated to 1800 F.
- Stealth Project's catalog lists full auto among its suppressor features, noting the rating is applicable to titanium models.
- Stealth Project's caliber compatibility chart rates the Maverick QD 5.56 for .17 HMR through .224 Valkyrie, including .22 Long Rifle, 5.56 NATO, 5.7x28mm, .220 Swift, .22-250 Remington and .223 Remington.
- The Maverick QD suppressors perform best with Stealth Project muzzle devices, but are also compatible with other attachment options.
Show all 15 ▾ ▴
- Stealth Project suppressors use a patented canted helical design in place of conventional baffles, with a single attenuation chamber to control muzzle blast.
- The baffle-less design eliminates the chance of a baffle strike; Stealth Project states there are no baffle strikes, ever.
- The design is self-tightening: force from high pressure gas on the canted helix creates a rotational force that tightens the suppressor.
- Stealth Project states first round flash is eliminated near 100%, because combustive ambient air is retained in the attenuation chamber rather than escaping through the muzzle before combustion.
- The Maverick Series uses a single continuous attenuation chamber and has the fastest heat dissipation rate of any suppressor per volume, with an average of 30-50% more surface area than the basic suppressor design.
- Accelerated Gas Technology accelerates gases towards the front of the suppressor, which Stealth Project says makes cleaning the suppressor a breeze — useful on auto-loading and SBR firearms that otherwise get dirty quickly.
- The Maverick Series is Stealth Project's helical titanium series, 100% titanium.
- The one piece core has no welds to fail and no multiple baffle chambers, so the system heats evenly along its entire length with no hot spots.
- Stealth Project lists its suppressors as user serviceable.
- QD suppressors require the purchase of a Stealth Project Flash Brake, sold separately.
- Stealth Project's caliber compatibility chart specifies a minimum 10 inch barrel for the Maverick QD 5.56.