Stealth ProjectFusion DT .30
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Multi-Caliber
- User Serviceable
- Direct Thread
length
7.75″
weight
21.44oz
MSRP
$700
length
7.75″
weight
21.44oz
calibers
5.56–.30
material
Titanium · Steel
interface
5/8x24 Direct Thread
MSRP
$700
- Overall length
- 7.75″
- Diameter
- 1.5″
- Weight
- 21.44 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium tube / Steel helical core
- Finish / treatment
- Black, Battleworn
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- Barrel restriction
- 10" minimum
- Maintenance
- User serviceable
- MSRP
- $700
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- The Fusion Series is rated to 1800 F.
- Stealth Project publishes 22.5 dB of sound reduction for the Fusion DT .30.
- Stealth Project's caliber compatibility chart rates the Fusion DT .30 for .240 Weatherby Magnum through 8mm Mauser, including 6mm Creedmoor, 6.5 Creedmoor, 6.5 PRC, .270 Winchester, .308 Winchester, .30-06 Springfield, .300 PRC and .300 Winchester Magnum.
- Stealth Project suppressors use a patented canted helical design in place of conventional baffles, with a single attenuation chamber to control muzzle blast.
Show all 16 ▾ ▴
- The baffle-less design eliminates the chance of a baffle strike; Stealth Project states there are no baffle strikes, ever.
- The design is self-tightening: force from high pressure gas on the canted helix creates a rotational force that tightens the suppressor.
- Stealth Project states first round flash is eliminated near 100%, because combustive ambient air is retained in the attenuation chamber rather than escaping through the muzzle before combustion.
- The Fusion suppressors use a single continuous attenuation chamber with an average of 30-50% more surface area than the basic baffle suppressor design, which helps with heat dissipation.
- The Fusion Series is lightweight, shorter in length with larger volume, and maximized recoil reduction; point of impact shift is minimized from unsuppressed to suppressed shooting.
- The Fusion DT .30 is direct thread, 5/8x24.
- The Fusion Series is Stealth Project's helical hybrid series: a steel helical core in a titanium tube.
- The one piece core has no welds to fail and no multiple baffle chambers, so the system heats evenly along its entire length with no hot spots.
- Stealth Project lists its suppressors as user serviceable.
- More surface area means more rounds downrange in a shorter amount of time.
- Stealth Project's caliber compatibility chart specifies a minimum 10 inch barrel for the Fusion DT .30.
- The compatibility chart raises the barrel floor for some magnum cartridges: the .300 Weatherby Magnum and .30-378 Weatherby need a minimum 18 inch barrel.