Stealth ProjectBolt .30
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Multi-Caliber
- User Serviceable
- Direct Thread
length
7.64″
weight
12oz
MSRP
$600
length
7.64″
weight
12oz
calibers
5.56–.30
material
Aluminum
interface
5/8x24 Direct Thread
MSRP
$600
- Overall length
- 7.64″
- Diameter
- 1.75″
- Weight
- 12 oz
- Material
- Aluminum
- Finish / treatment
- Black
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- Barrel restriction
- 16" minimum
- Maintenance
- User serviceable
- MSRP
- $600
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Cheaper than most .30 Cal / 7.62mm suppressors
medianTHIS SUPPRESSOR · $600
$199$2,160
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- The Bolt Series is rated to 500 F.
- Stealth Project publishes 26.0 dB of sound reduction for the Bolt .30.
- Stealth Project's caliber compatibility chart rates the Bolt .30 for .240 Weatherby Magnum through 8mm Mauser, including 6mm Creedmoor, 6.5 Creedmoor, 6.5 PRC, .270 Winchester, 7mm Remington Magnum, .308 Winchester, .30-06 Springfield and .300 Winchester Magnum.
- Stealth Project suppressors use a patented canted helical design in place of conventional baffles, with a single attenuation chamber to control muzzle blast.
Show all 18 ▾ ▴
- The baffle-less design eliminates the chance of a baffle strike; Stealth Project states there are no baffle strikes, ever.
- The design is self-tightening: force from high pressure gas on the canted helix creates a rotational force that tightens the suppressor.
- Stealth Project states first round flash is eliminated near 100%, because combustive ambient air is retained in the attenuation chamber rather than escaping through the muzzle before combustion.
- The Bolt suppressors use Accelerated Gas Technology to keep the suppressor cleaner and quieter, and take caliber inserts to reduce wear.
- Point of impact shift is minimized from unsuppressed to suppressed shooting in the field.
- The Bolt .30 is direct thread, 5/8x24.
- The Bolt Series is Stealth Project's helical aluminum series of suppressors.
- The one piece core has no welds to fail and no multiple baffle chambers, so the system heats evenly along its entire length with no hot spots.
- Stealth Project lists its suppressors as user serviceable.
- Stealth Project designed the Bolt Series for the hunter: ultra lightweight, shorter in length with larger volume, and maximized recoil reduction, primarily for hunting and precision shooting applications.
- The Bolt Series is only available in Direct Thread.
- Stealth Project's caliber compatibility chart specifies a minimum 16 inch barrel for the Bolt .30.
- The compatibility chart raises the barrel floor for some magnum cartridges: the .300 Weatherby Magnum and .30-378 Weatherby need a minimum 18 inch barrel.
- On the Bolt .30 the chart calls for a minimum 24 inch barrel with the .257 Weatherby Magnum, .264 Winchester Magnum, .270 Weatherby, 7mm Remington Magnum, 7mm RUM, 28 Nosler and .300 Winchester Magnum.