SonicoreRekkr DT 223
5.56mm / .223 suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Modular Length
- User Serviceable
- Direct Thread
length
7.6″
weight
14.6oz
MSRP
$300
length
7.6″
weight
14.6oz
calibers
5.56
material
Steel · Aluminum
interface
1/2x28 Direct Thread
MSRP
$300
- Overall length
- 7.6″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 2.5″–9.75″
- Median
- 6.12″
- Diameter
- 1.77″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 0.98″–2.2″
- Median
- 1.57″
- Weight
- 14.6 oz
- Material
- Aluminum / Stainless Steel
- Finish / treatment
- Hard Coat Anodized
- Max caliber
- 5.56mm / .223
- Base interface
- 1/2x28 Direct Thread
- Front cap
- none
- Full-auto rated
- No
- Barrel restriction
- 13.7" minimum
- Firing schedule
- Up to 60 rounds rapid fire (60 rounds in 30 seconds) before a cool-down. No full auto or FRT
- Maintenance
- User serviceable
- MSRP
- $300
- Class
- 5.56mm / .223
- n
- 292
- Range
- $199–$1,955
- Median
- $899
Longer than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · 7.6″
2.5″9.75″
Length compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Wider than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · 1.77″
0.98″2.2″
Diameter compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · $300
$199$1,955
MSRP compared against the 292 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Configurations
Modular length — this suppressor can be run at more than one length. The manufacturer does not publish the dimensions of each configuration, so the length above is the only one on record.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 1/2x28 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- Step down at back of suppressor allows greater compatibility in conjunction with common AR-15 hand guard inner diameters
- Direct thread eliminates need for costly QD muzzle devices and adapters and allows for easy installation
- Strategic serialization placement lessens chances of serial number destruction in case of an alignment issue causing a baffle/end cap strike
- The modular design allows the user to shorten the can when compactness ranks higher than suppression.
Show all 31 ▾ ▴
- The walls of the Rekkr are thicker than the Paradox to allow for maximum durability under enhanced fire schedules.
- Sonicore Suppressors are manufactured in Middletown, CT USA.
- The modular design lets the owner shorten the suppressor by removing baffles; the manufacturer notes that removing baffles decreases sound reduction.
- Integrated stainless steel muzzle brake acts as sacrificial baffle and allows suppressor to continuously tighten itself
- Stainless steel core with gas-disrupting grooves
- Thicker walls for durability and heavy knurled surface for faster heat dissipation and better grip when removing or installing suppressor
- The Rekkr DT is a direct thread suppressor, meant for higher volume shooting, with a lightweight and modular design machined from 6026-T9 Aluminum and 303 Stainless Steel, and finished with black, non-glare, Mil Spec Hard Coat Anodize.
- The Rekkr is kept fairly lightweight through using aluminum baffle modules in combination with 303 stainless steel baffle inserts to create a steel “core.” An integrated stainless steel muzzle brake spins gas in a way to continuously tighten the suppressor onto your muzzle.
- Sonicore suppressors are made out of a combination of 6026 T9 aluminum and 303 stainless steel, depending upon the model. All Sonicore suppressors are hardcoat anodized.
- Sonicore offers a limited lifetime warranty. For more details, please consult your owner’s manual or our website.
- The period between cleanings will vary depending on what type of ammunition you are shooting, the type of host firearm, and environmental conditions such as rain or high humidity. We recommend cleaning the suppressor at a minimum after every 1,000-1,500 rounds.
- Reassembly calls for a moisture-resistant, high-temperature anti-seize lubricant on the baffle threads (the manual names Loctite LB-8023) so baffles do not seize together.
- Minimum barrel length — 5.56/.223: Minimum barrel length of 13.7 inches or greater is recommended.
- Minimum barrel length — .300 BLK Subsonic: Minimum barrel length of 8.5 inches or greater is recommended.
- Minimum barrel length — .300 BLK Supersonic: Minimum barrel length of 8.5 inches or greater is recommended.
- Minimum barrel length — .308 Win: Minimum barrel length of 18 inches or greater is recommended.
- Minimum barrel length — .30-06: Minimum barrel length of 18 inches or greater is recommended.
- Minimum barrel length — .300 WM: Minimum barrel length of 20 inches or greater is recommended.
- Rate of fire — 5.56/.223: User can fire up to 60 rounds “rapid fire” (For Example: 60 rounds in 30 seconds) before requiring a cool down period. No full auto or FRT.
- Rate of fire — .300 BLK Subsonic: No full auto or FRT.
- Rate of fire — .300 BLK Supersonic: No full auto or FRT.
- Rate of fire — .308 Win: User can fire up to 30 rounds “rapid fire” (For Example: 30 rounds in 15 seconds) before requiring a cool down period. No full auto or FRT.
- Due to the materials involved in construction, Sonicore Suppressors are not full auto rated.
- Sonicore Suppressors are not rated for FRT use.
- The minimum configuration recommended is the configuration the suppressor comes in from the factory.
- Use of an ultrasonic cleaner is not recommended for any Sonicore suppressor.
- Using a crush washer, peel washer, or anything else that causes misalignment voids the warranty.