Silent SteelCompact Streamer Flow (FI)
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- No Barrel Restrictions
- User Serviceable
- Full-Auto Rated
length
5.91″
weight
15.87oz
length
5.91″
weight
15.87oz
calibers
5.56–9mm
material
Steel
interface
HUB 1.375x24
- Overall length
- 5.91″
- Diameter
- 1.65″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 1″–2″
- Median
- 1.5″
- Weight
- 15.87 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- 303 Stainless Steel
- Max caliber
- 9mm
- Base interface
- HUB 1.375x24
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- Maintenance
- User serviceable
Wider than most 9mm / .36 Cal suppressors
Diameter compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most 9mm / .36 Cal suppressors
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
Configurations
- Stainless steel body5.91″ · 15.87oz
- Aluminum body5.91″ · 11.64oz
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Silent Steel BoltLok HUB Mount (US), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Measured sound pressure (LCPeak) next to the shooter’s ear, Gen 3 flow suppression unit. AR15, .223 Remington, 16" barrel: 136.7 dB.
- Measured sound pressure (LCPeak) next to the shooter’s ear, Gen 3 flow suppression unit. AR15, 300 BLK supersonic, 13" barrel: 143 dB.
- Measured sound pressure (LCPeak) next to the shooter’s ear, Gen 3 flow suppression unit. AR15, 300 BLK subsonic, 13" barrel: 132 dB.
- Measured sound pressure (LCPeak) next to the shooter’s ear, Gen 3 flow suppression unit. CZ Scorpion Evo, 9mm supersonic: 133 dB; subsonic: 129 dB.
Show all 18 ▾ ▴
- Measured sound pressure (LCPeak) next to the shooter’s ear, Gen 3 flow suppression unit. Remington 700, .308 Win, 24" barrel: 135 dB.
- Measured sound pressure (LCPeak) next to the shooter’s ear, Gen 3 flow suppression unit. Heckler & Koch MR308, 16" barrel: 139 dB.
- Free-float suppression unit expands inside the body, so the suppressor does not bend or twist when hot.
- The suppression module is user-swappable, which changes the caliber the suppressor is rated for.
- No minimum barrel length restrictions.
- Flow-through design vents combustion gases forward rather than trapping them, so no adjustable gas block or other rifle modification is needed.
- Full-auto rated with the stainless steel body.
- Controlled gas flow and rapid gas cooling eliminate virtually all flash, which prevents night-vision blooming on each shot.
- Fully serviceable: can be disassembled for cleaning and all parts can be replaced.
- Passes the SOCOM stress test cycles.
- Point of impact shift is 1-4 cm and straight down at 100 m in most cases; the taper-lock direct thread mount indexes at the same point on every remount.
- No harmful toxic gases directed to the shooter’s face and lungs, and no increased weapon fouling.
- Delivered with a storage pouch and a Front Cap Key (FCK) disassembly tool.
- The aluminum body is recommended only for 9.00 mm PCC carbines and single-shot rifles; full-auto rating applies to the stainless steel body with the flow suppression module.