Silent SteelCompact Streamer Baffle (FI)
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- No Barrel Restrictions
- User Serviceable
length
5.91″
weight
9.52oz
length
5.91″
weight
9.52oz
calibers
5.56–9mm
material
Steel · Aluminum
interface
HUB 1.375x24
- Overall length
- 5.91″
- Diameter
- 1.65″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 1″–2″
- Median
- 1.5″
- Weight
- 9.52 oz
- Material
- 7075 Aluminum, 303 Stainless Steel
- Max caliber
- 9mm
- Base interface
- HUB 1.375x24
- Backpressure
- Low
- Full-auto rated
- No
- Barrel restriction
- None (manufacturer stated)
- Maintenance
- User serviceable
Wider than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 1.65″
1″2″
Diameter compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Silent Steel BoltLok HUB Mount (US), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Measured with the baffle suppression unit: TC Contender, .223 Rem 16" barrel, -29.29 dB (167.25 dB unsuppressed to 137.96 dB at 1 m).
- Measured with the baffle suppression unit: Remington 700, .308 Win 18" barrel, -26.95 dB (166.6 dB unsuppressed to 139.65 dB at 1 m).
- Free-float suppression unit expands inside the body, so the suppressor does not bend or twist when hot.
- The suppression module is user-swappable, which changes the caliber the suppressor is rated for.
Show all 9 ▾ ▴
- No minimum barrel length restrictions.
- Fully serviceable: can be disassembled for cleaning and all parts can be replaced.
- Point of impact shift is 1-4 cm and straight down at 100 m in most cases; the taper-lock direct thread mount indexes at the same point on every remount.
- Delivered with a storage pouch and a Front Cap Key (FCK) disassembly tool.
- The aluminum body is recommended only for 9.00 mm PCC carbines and single-shot rifles; full-auto rating applies to the stainless steel body with the flow suppression module.