Shaw Armament SystemsColossal 50
Large Bore (.338+) suppressor · ThunderCan Colossal Brake interface · specs and compatibility from the manufacturer
Notable features
- No Barrel Restrictions
- Full-Auto Rated
length
17.5″
weight
105.3oz
length
17.5″
weight
105.3oz
calibers
.338+
material
Titanium · Inconel
interface
ThunderCan Colossal Brake
- Overall length
- 17.5″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 5.3″–22.5″
- Median
- 9.16″
- Diameter
- 2.5″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 1.38″–2.62″
- Median
- 1.75″
- Weight
- 105.3 oz
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 6.85 oz–105.3 oz
- Median
- 19 oz
- Material
- Grade 5 Titanium, Inconel 625
- Max caliber
- .50 BMG
- Base interface
- ThunderCan Colossal Brake
- Front cap
- Fixed
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- Firing schedule
- Limited full auto
Longer than most Large Bore (.338+) suppressors
Length compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Wider than most Large Bore (.338+) suppressors
Diameter compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most Large Bore (.338+) suppressors
Weight compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- ThunderCan Colossal Brake
- Front cap
- Fixed
This suppressor's ThunderCan Colossal Brake takes no separate mount. 1 muzzle device in our catalog attach to it directly.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- A fully 3D-printed suppressor with complex internal geometries impossible to achieve with traditional machining
- A monolithic core provides structural integrity without the added weight of conventional welds
- Next-generation internal design directs gas flow to significantly reduce felt recoil on .50 BMG platforms while minimizing backpressure for reliable cycling and consistent point of impact
- Available in Grade 5 titanium for a lightweight solution or Inconel 625 for extreme durability under sustained high-temperature firing
Show all 5 ▾ ▴
- No barrel restrictions; durability rated Limited Full Auto