Rex SilentiumMG7 K .224
5.56mm / .223 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- No Barrel Restrictions
- Full-Auto Rated
- Sealed
length
5.5″
weight
11.3oz
MSRP
$600
length
5.5″
weight
11.3oz
calibers
5.56
material
Steel
interface
HUB 1.375x24
MSRP
$600
- Overall length
- 5.5″
- Diameter
- 1.7″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 0.98″–2.2″
- Median
- 1.57″
- Weight
- 11.3 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Raw Heat Treat
- Max caliber
- 5.56mm / .223
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $600
- Class
- 5.56mm / .223
- n
- 292
- Range
- $199–$1,955
- Median
- $899
Wider than most 5.56mm / .223 suppressors
Diameter compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 5.56mm / .223 suppressors
MSRP compared against the 292 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Rex Silentium DTM Low Profile Direct Thread Mount (.578x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Full Auto Rated
- Industry Standard 1.375-24 Main Thread Mount
- BANKABILITY! Lifetime, No BS Warranty
- GEN10 cores: Lighter, Tougher, Quieter!
Show all 12 ▾ ▴
- The main thread on the back of the suppressor is 1.375-24.
- There are many options for QD mounts on the market.
- Tubeless & Fully Welded
- 100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile
- Unique RAW Flat Bronze Heat Treated Finish
- Includes a 1/2-28 direct thread mount ( others available here )
- No Barrel Length Restrictions
- The MG7 and all of our rifle suppressors are compatible with industry standard quick disconnect (QD) mounts.