Rex SilentiumMG10 Ultra .308
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- No Barrel Restrictions
- Full-Auto Rated
- Sealed
length
8.6″
weight
19.8oz
MSRP
$900
length
8.6″
weight
19.8oz
calibers
5.56–.30
material
Steel
interface
HUB 1.375x24
MSRP
$900
- Overall length
- 8.6″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.7″
- Weight
- 19.8 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Raw Heat Treat
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $900
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Rex Silentium DTM Low Profile Direct Thread Mount (.578x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Full Auto Rated
- Industry Standard 1.375-24 Main Thread Mount
- Easy to Recore
- Standing on the shoulders of the GEN3 Fidelis Rifle Suppressor, the MG10 pushes the suppression-centric design further.
Show all 12 ▾ ▴
- Ready to take on your wildest host, whether a wildcat, ultra magnum, Weatherby magnum or just a vanilla 30 caliber, the MG10 can handle whatever punishment you choose.
- Backed by our lifetime, no bullshit warranty we designed the MG10 to be easily recored should you ever have any problems.
- Tubeless & Fully Welded
- 100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile
- Unique RAW Flat Bronze Heat Treated Finish
- Now in a tubeless embodiment, we have leveraged the years of development and testing to craft a tough, light and above all, quiet suppressor.
- Includes a 5/8-24 direct thread mount ( others available here )
- No Barrel Length Restrictions