Rex SilentiumMG10 MOD X ULBP .358
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
- Sealed
length
7.8″
weight
17.9oz
MSRP
$1,000
length
7.8″
weight
17.9oz
calibers
9mm | .338+
material
Steel
interface
HUB 1.375x24
MSRP
$1,000
- Overall length
- 7.8″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 5.3″–22.5″
- Median
- 9.16″
- Diameter
- 1.7″
- Weight
- 17.9 oz
- Material
- 17-4 Stainless Steel
- Max caliber
- .358 Cal / .338
- Base interface
- HUB 1.375x24
- Front cap
- HUB 1.375x24
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $1,000
Shorter than most Large Bore (.338+) suppressors
Length compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Rex Silentium DTM Low Profile Direct Thread Mount (.578x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- MAXIMUM SUPPRESSION FOR BOLT HOSTS & ULBP FOR GAS DRIVEN HOSTS IN ONE PURCHASE
- Short K length (MG7), Magnum length (MG7 + MODULE) & ULBP CONFIG in one set
- Micro Low Angle Locking Taper on Module and End Cap for positive alignment, locking and sealing
- Removable & Replaceable End Cap ( Plain End Cap Style available here )
Show all 9 ▾ ▴
- Tubeless & Fully Welded Base and Module
- 100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile
- Easy to Recore and or RE-THREAD Lifetime, No BS Warranty For fully welded older style MG10 cans please go to the MG X listing.
- Includes a 5/8-24 direct thread mount ( others available here )
- Industry Standard HUB 1.375-24 Main Thread Mount compatible with many QD Systems ALL THREADS ON THIS CAN ARE HUB THREAD!!!