ReplicatorAcer S
.22 Cal / Rimfire suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Runs on a Handgun Without a Booster
- TBAC Summit Tested
- Sealed
- Rimfire Only
- Direct Thread
length
4.3″
weight
4oz
MSRP
$375
length
4.3″
weight
4oz
calibers
.22 rimfire
material
Inconel
interface
1/2x28 Direct Thread
MSRP
$375
- Overall length
- 4.3″
- Class
- .22 Cal / Rimfire
- n
- 191
- Range
- 2.38″–8.5″
- Median
- 5.5″
- Diameter
- 1″
- Weight
- 4 oz
- Material
- Additive Manufactured Super-Nickel Alloy (aerospace Inconel variant)
- Finish / treatment
- Cerakote
- Max caliber
- .22 LR
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $375
Shorter than most .22 Cal / Rimfire suppressors
Length compared against the 191 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
This suppressor threads straight onto the barrel, so no mount is required. 6 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Acer S was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Pressure rated up to .22 LR.
- ML 116 dBA measured on a 4.8-inch barrel with CCI Standard ammunition.
- Industry leading suppression for standard velocity .22LR, 1260 FPS and below.
- The Acer S (short version) was specifically designed to be as short as possible while still getting industry leading suppression numbers.
Show all 18 ▾ ▴
- Excellent choice for length, weight and suppression.
- Standard 1/2x28 threads fit most .22LR barrels; some pistols may require an adapter.
- Cerakote color options: C-102 Graphite Black (up to 1,800°F), C-267 Magpul FDE (up to 1,200°F)
- Replicator was previously known as RR Weapons. The product manuals state the company is going through a name change, so a product may be labelled either way.
- Additive Manufactured Super-Nickel Titanium Alloy (Aerospace proven Inconel variant that is stronger than normal Inconel by almost 2.4 times at 1492°F)
- Monolithic construction: the baffles and outer tube are printed as one piece, so there are no welds to fail and there are zero internal coatings to fail.
- 2,000 to 3,000 rounds between recommended cleanings, 11,000 maximum.
- Rifles chambered in .22LR, pistols with a stationary (blowback-operated) barrel, and compact platforms where added length matters.
- Competitive shooting, training, pest control and recreational shooting.
- The Acer S is Replicator's shortest and lightest .22 LR suppressor and excels on pistols and rifles. It is not full auto rated.
- Threads 1/2x28 directly onto the barrel; 5/8" exterior wrench flats, no wrench included.
- Temperature rating: suggested 700F or lower.
- Minimum barrel length: no restrictions.
- Not designed for full-auto use. Specifically designed for standard velocity .22 rounds, 1200 FPS and below; higher velocities lose a few decibels of suppression but stay hearing safe.
