PTRVENT 2
9mm / .36 Cal suppressor · 1.125x28 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- Low Backpressure
- PEW Science Reviewed
- TBAC Summit Tested
- Full-Auto Rated
length
7.6″
weight
8.9oz
MSRP
$1,339
length
7.6″
weight
8.9oz
calibers
9mm
material
Titanium
interface
1.125x28
MSRP
$1,339
- Overall length
- 7.6″
- Class
- 9mm / .36 Cal
- n
- 256
- Range
- 2.5″–13.7″
- Median
- 6.75″
- Diameter
- 1.5″
- Weight
- 8.9 oz
- Material
- Titanium
- Max caliber
- 9mm
- Base interface
- 1.125x28
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Firing schedule
- 120 rounds (full auto) - 10 minute cool down
- MSRP
- $1,339
- Class
- 9mm / .36 Cal
- n
- 218
- Range
- $249–$2,888
- Median
- $800
Longer than most 9mm / .36 Cal suppressors
Length compared against the 256 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most 9mm / .36 Cal suppressors
MSRP compared against the 218 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 1.125x28
- Front cap
- Fixed
The 1.125x28 is an open standard: 10 mounts and 263 muzzle devices in our catalog fit this suppressor, including PTR VENT 2 1/2x28 Direct Thread Adapter, Canik VOID-9 Booster Assembly and Griffin Armament EZ-LOK™ Mount Interfaces (Various Pitches) 1.125x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. VENT 2 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- Rated: 120 Rounds (full auto) - 10 Minute cool down 9MM - Full Auto Rated (No barrel Restriction) 357 Magnum / 38 Special (No barrel Restriction) 300 BLK Subsonic (8″ Barrel or longer)
- Designed for versatility, the VENT 2 is rated for 9×19mm full-auto firing schedules of up to 120 rounds, followed by a 10-minute cool-down, with no barrel-length restrictions.
- It is also rated for .357 Magnum, .38 Special, and 300 BLK subsonic use (8” barrel or longer), making it a capable multi-platform suppressor.
- Additional Features: Patented 3D-printed monolithic structure with Purposely Induced Porosity™
Show all 8 ▾ ▴
- At 7.6 inches long and weighing just 8.9 ounces, the VENT 2 delivers exceptional suppression without adding unnecessary bulk or weight.
- Overall Finish: Advanced proprietary internal and external coating
- Proprietary internal and external coatings enhance erosion resistance, reduce carbon adhesion, and simplify cleaning after high round counts.
- Mount: 1.125x28, 1/2x28 direct thread adapter included
