Otter Creek LabsUniverse-36
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- PEW Science Reviewed
- TBAC Summit Tested
- Full-Auto Rated
length
7″
weight
14oz
length
7″
weight
14oz
calibers
5.56–.338+
material
Steel · Inconel
interface
HUB 1.375x24
- Overall length
- 7″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 5.3″–22.5″
- Median
- 9.16″
- Diameter
- 1.5″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 1.38″–2.62″
- Median
- 1.75″
- Weight
- 14 oz
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 6.85 oz–105.3 oz
- Median
- 19 oz
- Material
- Inconel / Stainless Steel end caps
- Max caliber
- .358 Cal / .338
- Base interface
- HUB 1.375x24
- Front cap
- none
- Full-auto rated
- Yes
Shorter than most Large Bore (.338+) suppressors
Length compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most Large Bore (.338+) suppressors
Diameter compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most Large Bore (.338+) suppressors
Weight compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
- Front cap
- none
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Otter Creek Labs HUB Direct Thread Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. Universe-36 was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- One suppressor that will work on every gun in your safe as long as the bullet is .36 or smaller — extremely adjustable/adaptable with no proprietary tools needed.
- Comes with the 9mm low back pressure/vented end cap installed; does NOT include a mount — you supply your own.
- Do not use on 338 Lapua if barrel is less than 24 inches in length.