Next Level ArmamentNLS 22 Varmint
.22 Cal / Rimfire suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Runs on a Handgun Without a Booster
- User Serviceable
- TBAC Summit Tested
- Rimfire Only
- Direct Thread
length
6″
weight
3.2oz
MSRP
$150
length
6″
weight
3.2oz
calibers
.22 rimfire
material
Aluminum
interface
1/2x28 Direct Thread
MSRP
$150
- Overall length
- 6″
- Class
- .22 Cal / Rimfire
- n
- 191
- Range
- 2.38″–8.5″
- Median
- 5.5″
- Diameter
- 1.18″
- Class
- .22 Cal / Rimfire
- n
- 188
- Range
- 0.75″–1.98″
- Median
- 1″
- Weight
- 3.2 oz
- Class
- .22 Cal / Rimfire
- n
- 188
- Range
- 0.9 oz–13.5 oz
- Median
- 4.3 oz
- Material
- Aluminum mount and blast chamber / 3D-printed carbon fiber baffle stack
- Finish / treatment
- Hard-Coat Anodized
- Max caliber
- .22 LR
- Base interface
- 1/2x28 Direct Thread
- Full-auto rated
- No
- Maintenance
- User serviceable
- MSRP
- $150
- Class
- .22 Cal / Rimfire
- n
- 170
- Range
- $99–$1,000
- Median
- $400
Longer than most .22 Cal / Rimfire suppressors
Length compared against the 191 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Wider than most .22 Cal / Rimfire suppressors
Diameter compared against the 188 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .22 Cal / Rimfire suppressors
Weight compared against the 188 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .22 Cal / Rimfire suppressors
MSRP compared against the 170 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 1/2x28 Direct Thread
This suppressor threads straight onto the barrel, so no mount is required. 6 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. NLS 22 Varmint was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Rated for .22 LR standard velocity, .22 LR subsonic and .17 HMR.
- The maker's caliber chart approves .17 HMR, .17 WSM and .22 LR, and .22 Mag for rifle use only; 5.7 and every centerfire cartridge are not approved, and it is not full-auto rated.
- Fully assembled it measures 6 inches long with a 1.18-inch diameter and weighs 3.2 ounces.
- The kit form with two extra baffle stacks was discontinued after the ATF ruled it was not acceptable.
Show all 10 ▾ ▴
- An aluminum threaded mount and blast chamber with a hard coat anodize finish; because the blast chamber takes most of the pressure, the rest of the suppressor can be light, and each Modular Baffle Stack is 3D printed in carbon fiber.
- The baffle module is replaceable: remove the mounting screws, slide it off the mount and send it back, and the maker returns one with its current baffle design for $18 including shipping (proof of ownership required).
- Clean the baffle stack with hot soapy water and a soft bottle brush, never in an ultrasonic cleaner; the aluminum mount can go in an ultrasonic cleaner, and corrosive solvents void the warranty.
- Designed for the backyard shooter and the .22LR varmint hunter; the maker says it cycles reliably on a .22LR semi-auto pistol without spring assists or special adapters.
- The modular baffle stacks cannot be installed directly onto a firearm without the mount and blast chamber; modifying one to run without the mount can lead to immediate failure from high pressure.
- Rimfire use only. Not rated for centerfire cartridges.
