LWRCIHigh Flow Suppressor 9-Ti
9mm / .36 Cal suppressor · LWRCI 9mm Mount interface · specs and compatibility from the manufacturer
Notable features
- Low Backpressure
- Multi-Caliber
- Full-Auto Rated
- Sealed
length
5.6″
weight
9oz
MSRP
$1,050
length
5.6″
weight
9oz
calibers
.30 | 9mm
material
Titanium
interface
LWRCI 9mm Mount
MSRP
$1,050
- Availability
- In production
- Overall length
- 5.6″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 3.5″–13.7″
- Median
- 6.95″
- Diameter
- 1.5″
- Weight
- 9 oz
- Material
- Titanium
- Finish / treatment
- C-Series Cerakote
- Max caliber
- 9mm
- Base interface
- LWRCI 9mm Mount
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $1,050
- Class
- 9mm / .36 Cal
- n
- 176
- Range
- $260–$2,888
- Median
- $802
Shorter than most 9mm / .36 Cal suppressors
Length compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most 9mm / .36 Cal suppressors
MSRP compared against the 176 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- LWRCI 9mm Mount
- Front cap
- Fixed
This suppressor uses LWRCI's proprietary LWRCI 9mm Mount: 2 mounts in our catalog fit it, all from LWRCI. Plan on buying mounting hardware from LWRCI.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- 9mm NATO; .300 BLK rated, .350 Legend, .357/.38 Special.
- The S-9-Ti is a full auto-rated suppressor for the 9mm caliber round. Full auto-rated is defined as a suppressor that can withstand the sustained heat and pressure of a firearm in full auto mode.
- Runout tested: Yes.
- The S-9-Ti is optimized to reduce backpressure and flow gas out of the suppressor and away from the shooter.
Show all 10 ▾ ▴
- PRECISION - Vented core design strips gas away from the projectile as it passes through the suppressor, enhancing inherent precision of the system.
- BACKPRESSURE - Vented core and endcap design minimize backpressure to the host firearm.
- The S-9-Ti has a C-Series Cerakote coating making it hi-temp rated and ideal for suppressors.
- These are all fully-welded to maximize strength and durability.
- Intended use: PCC.
- The S-9-Ti ships with a 1/2x28 direct thread adapter. Also available in other thread pitches. A 3-lug adapter is in the works.