LWRCIHigh Flow Suppressor 762-Ti
.30 Cal / 7.62mm suppressor · LWRCI QD interface · specs and compatibility from the manufacturer
Notable features
- Low Backpressure
- Multi-Caliber
- Sealed
length
7.5″
weight
13oz
MSRP
$1,199
length
7.5″
weight
13oz
calibers
5.56–.30
material
Titanium
interface
LWRCI QD
MSRP
$1,199
- Availability
- In production
- Overall length
- 7.5″
- Diameter
- 1.75″
- Weight
- 13 oz
- Material
- Titanium
- Finish / treatment
- C-Series Cerakote
- Max caliber
- 7.62mm
- Base interface
- LWRCI QD
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- No
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $1,199
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Pricier than most .30 Cal / 7.62mm suppressors
medianTHIS SUPPRESSOR · $1,199
$199$2,160
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- LWRCI QD
- Front cap
- Fixed
This suppressor's LWRCI QD takes no separate mount. 2 muzzle devices in our catalog attach to it directly.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Up to 7.62 diameter cartridges (.308, 6.5 CM, 6.8 SPC, etc.), magnum rated/approved.
- Full-auto rated: No (can handle limited bursts or sustained semi-auto, but not continuous full auto).
- Runout tested: Yes.
- The S-762-Ti has a Wire EDM bore - on rifle suppressors, EDM'ing the bore allows for a precise and uniform bore.
Show all 12 ▾ ▴
- The S-762-Ti is optimized to reduce backpressure and flow gas out of the suppressor and away from the shooter.
- FLASH - Internal gas flow and endcap design was built to mitigate flash, even on shorter barrels.
- PRECISION - Vented blast chamber and multi-chamber baffle design strips gas away from the projectile as it passes through the suppressor, enhancing inherent precision of the system.
- BACKPRESSURE - High gas-flow rate blast chamber and baffle design push gas to a vented endcap, allowing gases to exit the suppressor with minimal backpressure to the host rifle.
- The S-762-Ti has a C-Series Cerakote coating making it hi-temp rated and ideal for suppressors.
- These are all fully-welded to maximize strength and durability.
- Intended use: Precision Rifle.
- The S-762-Ti utilizes the QD Flash Hider, shipping with a 5/8 x 24 mount.