Lone Star SilencerHunter
9mm / .36 Cal suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Multi-Caliber
- Direct Thread
length
9.1″
weight
23oz
length
9.1″
weight
23oz
calibers
5.56–.338+
material
Steel
interface
5/8x24 Direct Thread
- Overall length
- 9.1″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 3.5″–13.7″
- Median
- 6.95″
- Diameter
- 1.58″
- Weight
- 23 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- Stainless Steel
- Finish / treatment
- Natural stainless, High-temperature Cerakote
- Max caliber
- .36 Cal
- Base interface
- 5/8x24 Direct Thread
Longer than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 9.1″
3.5″13.7″
Length compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 23 oz
2.5 oz23 oz
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- Caliber / Projectile Diameter: Approved for rifle projectiles up to .36 inches in diameter.
- Maximum Cartridge Rating: Rated up to .300 Norma Magnum, including .338 Lapua Magnum, provided projectile diameter does not exceed .36 inches.
- Mounting: Direct-thread only; Thread Pitch: 5/8×24 TPI
- Machined from a single bar of heat-treated 17-4 stainless steel, the Hunter delivers dependable suppression and rigid, proven construction
Show all 12 ▾ ▴
- Material: Stainless steel construction
- Finish: Natural stainless or high-temperature Cerakote (model dependent)
- Firing Schedule: Precision/hunting rated; designed for sustained accuracy with reasonable firing cadence. Allow cooling during extended strings.
- Lifetime repair or replacement on defects, damage, or failures. No registration or hoops to jump through—your guarantee is automatic.
- What you should have in the box: Hunter Silencer; Owner's Manual. No adapters or alternate mounting components are included. The Hunter is direct-thread only.
- Barrel Restrictions: Minimum 10.5″ barrels for 5.56; Minimum 6″ barrels for .300 Blackout; Minimum 12.5″ barrels for .308; Minimum 18″ barrels for all magnum cartridges
- The Hunter is not HUB compatible and is not designed for quick-detach or secondary mounting systems.
- Do not use ablative media such as water, grease, oil, or gel inside the suppressor. Running the Hunter "wet" is not recommended and may result in unsafe pressure levels, suppressor damage, or personal injury.