Lone Star SilencerDrifter Ti
5.56mm / .223 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
length
7.38″
weight
10.5oz
length
7.38″
weight
10.5oz
calibers
5.56
material
Titanium
interface
HUB 1.375x24
- Overall length
- 7.38″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 2.5″–9.75″
- Median
- 6.12″
- Diameter
- 1.49″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 0.98″–2.2″
- Median
- 1.57″
- Weight
- 10.5 oz
- Material
- Grade 5 Titanium (Ti-6Al-4V)
- Finish / treatment
- High-temperature Cerakote
- Max caliber
- 5.56mm / .223
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Firing schedule
- Full-auto rated for three (3) consecutive 30-round magazines of 5.56 NATO before cooling
Longer than most 5.56mm / .223 suppressors
Length compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most 5.56mm / .223 suppressors
Diameter compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Lone Star Silencer Direct Thread Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Caliber: Dedicated .223 / 5.56 NATO
- Maximum Cartridge Rating: Rated up to 22 Creedmoor
- Mounting: HUB-compatible system with direct-thread adapter included
- The silencer is fully HUB compatible (1.375x24). This allows use of a wide variety of quick-detach mounts and muzzle devices.
Show all 13 ▾ ▴
- Material: Grade 5 Titanium (Ti-6Al-4V)
- Finish: High-temperature Cerakote
- Firing Schedule: Full-auto rated for three (3) consecutive 30-round magazines of 5.56 NATO before cooling
- Warranty: Backed by the Quiet Confidence Guarantee
- Lifetime repair or replacement on defects, damage, or failures. No registration or hoops to jump through—your guarantee is automatic.
- Built to run hard while reducing overall weight, the Drifter Ti is optimized for shooters who value control and repeatability without the penalty of excess mass.
- Included Mount: Ships with 1/2×28 direct-thread adapter
- What you should have in the box: Drifter Silencer (Stainless Steel or Titanium); Direct thread adapter (1/2x28); (1) Solid endcap; (1) Vented endcap; Endcap / HUB adapter tool; Owner's manual
- Barrel Restrictions: Minimum 11.5″ barrels for 5.56 NATO / .223 Rem; Minimum 20″ barrels for 224 Valkyrie and 22 Creedmoor