Liberty Precision MachineCOMP 6.5
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
length
7.2″
weight
21.8oz
MSRP
$929
length
7.2″
weight
21.8oz
calibers
5.56 | 6.5
material
Steel
interface
HUB 1.375x24
MSRP
$929
- Overall length
- 7.2″
- Diameter
- 1.75″
- Weight
- 21.8 oz
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 4.4 oz–23.9 oz
- Median
- 12.45 oz
- Material
- 17-4 Stainless Steel
- Max caliber
- 6.5mm / .264
- Base interface
- HUB 1.375x24
- Front cap
- MBEC .30 cal (included)
- Full-auto rated
- Yes
- Barrel restriction
- 7.5" minimum
- MSRP
- $929
Heavier than most 6mm / 6.5mm suppressors
Weight compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- MBEC .30 cal (included)
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The purposely heavy design brings the balance of the rifle forward and gives the most inertial resistance possible, for a very dead and benign feel under recoil; the high flow rate is also suitable for semi-auto hosts.
- The LPM COMP 6.5 is a competition silencer designed to give competitors in PRS and similar the best possible chance to spot their own impacts, make corrections, and be competitive; its only focus is recoil reduction.
- The included MBEC is meant for competition use only, as it significantly reduces the effectiveness of a silencer and makes the system much louder.