Liberty Precision MachineAnthem-K2
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
- Full-Auto Rated
length
5.5″
weight
11.8oz
MSRP
$579
length
5.5″
weight
11.8oz
calibers
5.56–.30
material
Steel
interface
HUB 1.375x24
MSRP
$579
- Overall length
- 5.5″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.74″
- Weight
- 11.8 oz
- Material
- 17-4 Stainless Steel
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- LPM 1x24 (removable)
- Full-auto rated
- Yes
- MSRP
- $579
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- LPM 1x24 (removable)
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. Anthem-K2 was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Liberty Precision Machine designed the Anthem 2 series around five priorities: maximum sound reduction for a given length, maximum strength for a given weight, no negative impact on accuracy, maximum visible flash signature reduction, and low blowback for gas operated firearms.
- A progressive baffle design and spacing allows LPM to tune the silencer for the various pressure regimes and gas dynamics experienced over the length of the silencer; the Anthem 2 series has market leading efficiency across many cartridges and firearm hosts.
- Ships with an included 5/8-24 Rearden Ti direct thread adapter.