LaneScorpion Magnum (Stainless)
Large Bore (.338+) suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- User Serviceable
- Direct Thread
length
9″
weight
26oz
MSRP
$550
length
9″
weight
26oz
calibers
.30 | .338+
material
Steel
interface
5/8x24 Direct Thread
MSRP
$550
- Overall length
- 9″
- Diameter
- 1.5″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 1.38″–2.62″
- Median
- 1.75″
- Weight
- 26 oz
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 6.85 oz–105.3 oz
- Median
- 19 oz
- Material
- Stainless Steel
- Max caliber
- .338 Lapua
- Base interface
- 5/8x24 Direct Thread
- Front cap
- none
- Full-auto rated
- No
- Maintenance
- User serviceable
- MSRP
- $550
- Class
- Large Bore (.338+)
- n
- 99
- Range
- $499–$5,495
- Median
- $1,155
Narrower than most Large Bore (.338+) suppressors
Diameter compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most Large Bore (.338+) suppressors
Weight compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most Large Bore (.338+) suppressors
MSRP compared against the 99 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- Calibers: 338 Winchester Magnum, 300 Weatherby Magnum, 300 Remington Ultra Magnum, 300 Winchester Magnum, as well as smaller calibers. Maximum powder charge 115 grain.
- Decibel reduction 34dB+, tested in accordance with MIL-STD-1474D using a B&K 2209 SPL meter with a B&K 4938 1/4" pressure microphone.
- The plus sign notes Lane could not meter the maximum reduction because the magnum rifle tested over 170 dB, the maximum SPL range of their meter; 170 dB is used as the unsuppressed baseline.
- Take-apart design: the Scorpion Magnum disassembles for cleaning and future upgrades without replacing the whole unit.
Show all 6 ▾ ▴
- Available in three material configurations: SSS (stainless steel core and cap, stainless steel tube), SST (stainless steel core and cap, titanium tube), or TTT (titanium core and cap, titanium tube). Colors available at no additional cost: Black, Desert Sand, Coyote Tan, OD Green, Desert Sage, Titanium, Stainless Steel.
- The Scorpion Magnum is one of the only take-apart 30 caliber magnum suppressors made. It was developed to suppress the 300 RUM but can handle loads up to 338 Lapua Magnum. Suppression is excellent but one of the largest factors in these calibers is recoil reduction.