HUXWRXRAD 22
5.56mm / .223 suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Low Backpressure
- User Serviceable
- Full-Auto Rated
- Direct Thread
length
5.57″
weight
5.5oz
MSRP
$449
length
5.57″
weight
5.5oz
calibers
5.56
material
Titanium · Steel
interface
1/2x28 Direct Thread
MSRP
$449
- Overall length
- 5.57″
- Diameter
- 1.08″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 0.98″–2.2″
- Median
- 1.57″
- Weight
- 5.5 oz
- Class
- 5.56mm / .223
- n
- 328
- Range
- 1.7 oz–27 oz
- Median
- 13 oz
- Material
- Titanium / 17-4 Stainless
- Max caliber
- 5.7mm
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Maintenance
- User serviceable
- MSRP
- $449
- Class
- 5.56mm / .223
- n
- 292
- Range
- $199–$1,955
- Median
- $899
Narrower than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · 1.08″
0.98″2.2″
Diameter compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · 5.5 oz
1.7 oz27 oz
Weight compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 5.56mm / .223 suppressors
medianTHIS SUPPRESSOR · $449
$199$1,955
MSRP compared against the 292 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 1/2x28 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- The RAD 22 measures 114–118 dB on most .22LR platforms using CCI standard ammunition.
- The RAD 22 measures 130–133 dB on an 8-inch CMMG 5.7mm rifle.
- The RAD 22 is 2-4 dB quieter at the ear than the most popular .22 suppressor when tested on a Ruger Mark IV.
- The RAD 22 is one ounce lighter than the most popular .22 suppressor.
Show all 11 ▾ ▴
- The RAD 22 runs quieter and much cleaner than other rimfire suppressors.
- The RAD 22 uses next generation Flow-Baffle® technology, the same technology used in the RAD 9 and RAD 45 pistol suppressors, which substantially reduces gas blowback while maintaining superior rimfire performance.
- The RAD 22 is designed to disassemble and reassemble without special tools or indexing.
- The RAD 22 uses a ½ x 28 thread pitch to connect directly to the host firearm.
- The RAD 22 is constructed from titanium and 17-4 heat-treated stainless steel, combining lightweight properties with durability.
- The RAD 22 is full-auto rated.
- The RAD 22 is optimized for rimfire and small-caliber platforms chambered in 22LR, 22 MAG, 5.7mm, and 17 HMR.
Unattributed
- The RAD 22 runs quieter and much cleaner than other rimfire suppressors.
- An ounce lighter and 2-4 dB quieter at the ear than the most popular .22 suppressor on a Ruger Mark IV.
- The HUXWRX Test Rifles shall not exceed 140 dB ten shot average sound pressure level at shooter's ear during barrel life (Hearing Safe).
- HUXWRX Suppressors are engineered and tested to meet the highest military accuracy specifications worldwide (Precision Certified).
Show all 18 ▾ ▴
- HUXWRX Suppressors are engineered so that the mounting interface is precise and consistent, resulting in repeatable and minimal point of impact (POI) shift that meets military specifications worldwide.
- Bolt velocity increases vary between -2% to 5% depending on weapon system, barrel length, and ammo types (Recoil Management).
- Sound Pressure Levels: 114–118 dB on most .22LR platforms using CCI standard ammo.
- Sound Pressure Levels: 130–133 dB on 8″ CMMG 5.7mm rifle.
- Lightweight and quiet, the RAD 22 is full-auto rated and built with next generation Flow-Baffle® technology that substantially reduces gas blowback while maintaining superior rimfire performance.
- Easy to disassemble and reassemble without special tools or indexing.
- HUXWRX Torque Lock is a patented, tool-less locking system that ensures the suppressor will stay securely mounted onto the HUXWRX QD muzzle device.
- HUXWRX QD suppressors can be used on a variety of calibers and rifle platforms (Cross-Platform Compatible).
- Modifications to the bolt, gas tube, buffer or recoil springs, and other timing modifications are unnecessary (No Weapons Mods).
- Uses a ½ x 28 thread pitch to connect directly to the host firearm.
- Flow-Baffle® technology substantially reduces gas blowback while maintaining superior rimfire performance.
- The RAD 22 is made with titanium and 17-4 heat-treated stainless steel.
- HUXWRX suppressors full-auto rating guarantees the suppressor passes the USSOCOM Reliability Stress Test.
- Suppressor maintenance can be performed to increase the service life of the suppressor (Serviceable).