Hammer CreekHC67HD
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- No Barrel Restrictions
length
6″
weight
11.2oz
MSRP
$1,150
length
6″
weight
11.2oz
calibers
5.56–.30
material
Inconel
interface
HUB 1.375x24
MSRP
$1,150
- Overall length
- 6″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.5″
- Weight
- 11.2 oz
- Material
- 718 Inconel
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Barrel restriction
- None (manufacturer stated)
- MSRP
- $1,150
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The HC67 borrows from aerospace intake design to provide low-back pressure and a comfortably quiet shooting experience.
- For HUB mounted suppressors, select a HUB compatible adaptor externally threaded for the industry standard 1.375 x 24. Hammer Creek recommends a small amount of Rocksett on the adapter to prevent it backing off during firing.
- Crafted from 718 Inconel, the same alloy used on the hypersonic X-15 rocket plane.
- For duty use, or anyone running their equipment at the limit, Hammer Creek recommends the HC67HD in 718 Inconel. At 11.2oz it is half the weight of most suppressors in its class.
Show all 5 ▾ ▴
- No barrel restrictions for the HD versions in 718 Inconel.