Hammer CreekHC67 Ti (HUB)
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6″
weight
5.75oz
MSRP
$1,100
length
6″
weight
5.75oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$1,100
- Overall length
- 6″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.5″
- Weight
- 5.75 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- MSRP
- $1,100
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. HC67 Ti (HUB) was measured in 5 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Uses the industry standard HUB mount, 1.375x24.
- The HC67 borrows from aerospace intake design to provide low-back pressure and a comfortably quiet shooting experience.
- For HUB mounted suppressors, select a HUB compatible adaptor externally threaded for the industry standard 1.375 x 24. Hammer Creek recommends a small amount of Rocksett on the adapter to prevent it backing off during firing.
- At 5.75oz without an adapter the HC67 in Titanium is equally at home on a precision rifle, truck gun, or hunting rifle. A compact, lightweight all-around performer designed for practical use.
Show all 5 ▾ ▴
- In Titanium, Hammer Creek recommends an 8" minimum barrel for 300 BLK and a 10" minimum for light duty use in 5.56 NATO. No barrel restrictions for the HD versions in 718 Inconel.