Hammer CreekHC57HD
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- No Barrel Restrictions
- Direct Thread
length
5″
weight
10.9oz
MSRP
$1,100
length
5″
weight
10.9oz
calibers
5.56–.30
material
Inconel
interface
5/8x24 Direct Thread
MSRP
$1,100
- Overall length
- 5″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.5″
- Weight
- 10.9 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- 718 Inconel
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- Barrel restriction
- None (manufacturer stated)
- MSRP
- $1,100
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- Rated for all 7.62 and below.
- The HC57's 5" overall length with approximately 4.5" added to the weapon system will appeal to those looking to maintain a high degree of maneuverability on short-barreled rifles.
- Direct-thread installation: thread the suppressor on clockwise until it bottoms out snugly and hand tight on the shoulder behind the muzzle threads. If more than light finger pressure is required, stop immediately.
- Crafted from high-strength 718 Inconel using advanced additive manufacturing, with a monolithic construction that eliminates welds and weak points.
Show all 6 ▾ ▴
- Inconel's heat and corrosion resistance allows the HC57HD to withstand rigorous firing schedules without compromising effectiveness.
- Barrel length restrictions: none, for 7.62x51 NATO and 300 BLK.