Griffin ArmamentBushwhacker 36
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- User Serviceable
- Full-Auto Rated
length
7.2″
weight
15oz
MSRP
$850
length
7.2″
weight
15oz
calibers
5.56–.338+
material
Steel
interface
HUB 1.375x24
MSRP
$850
- Overall length
- 7.2″
- Diameter
- 1.5″
- Weight
- 15 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- 17-4 H900 Stainless Steel
- Max caliber
- .36 Cal / 9mm
- Base interface
- HUB 1.375x24
- Front cap
- Griffin Ratchet-LOK
- Full-auto rated
- Yes
- Maintenance
- User serviceable
- MSRP
- $850
Heavier than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 15 oz
2.5 oz23 oz
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Griffin Ratchet-LOK
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Griffin Armament A2 HUB Mount Adapter (1.375×24), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The ECO-FLOW™ baffle system provides 5-7dB sound pressure level drops versus similar market-sized suppressor options.
- Griffin's taper mount devices have been proven to provide the least point of impact shift and greatest accuracy for long-range shooters.
- dB rating: -24.23dB (118.12dB on 14.5″ .357 Lever Action), -33.71dB (136.84dB on 20″ Tikka T3X Arctic 7.62mm), -34.61dB (126.88dB on 9.5″ Griffin MK1 .300BLK), -36.41dB (132.79dB on 16″ Griffin MK1).
- dB rating: -24.23dB (118.12dB on 14.5" .357 Lever Action), -33.71dB (136.84dB on 20" Tikka T3X Arctic 7.62mm), -34.61dB (126.88dB on 9.5" Griffin MK1 .300BLK), -36.41dB (132.79dB on 16" Griffin MK1).
Show all 22 ▾ ▴
- The patent pending ECO-FLOW™ baffle technology provides reduced back pressure, greater structural strength, higher heat resistance for enhanced durability, and longer service life.
- The ECO-FLOW™ baffle system features locking geometry to prevent the assembly from rotating, ensuring ports remain in their optimal axial relationship for best sound suppression at all times.
- The patented Ratchet-LOK™ end cap system allows users to fully disassemble, clean, and maintain the suppressor, resetting it to factory weight and sound performance specifications after cleaning.
- Carbon and copper deposits reduce volume inside suppressors over time, degrading sound performance; the Ratchet-LOK™ system enables cleaning years after ownership to restore original performance.
- The included PLAN-A™ Short Taper Mount HUB Adapter provides an accurate, minimal length and weight solution for rifle configuration, supporting Griffin's taper mount devices.
- A booster piston system allows the suppressor to be converted for use on Browning-style action (tilt barrel) pistols, featuring a taper lock for secure attachment.
- The 3-Lug MP-5 style QD interface provides rapid and secure attachment for fixed barrel firearms such as sub machine guns and lever guns, adding minimal length and weight.
- The A2 HUB Adapter allows the Bushwhacker 36 to interface with mil-spec A2 compensators typically found on AR15-class firearms, and also fits Griffin Gate-LOK™ devices except the stealth flash hider.
- Using smaller-diameter Ratchet-LOK™ end caps matched to the fired caliber (e.g., .338 cap with .338LM, .30 cal cap with .300 BLK) can yield sound performance gains of as much as 6dB.
- The suppressor features a 1.375×24 threaded rear interface to support alternative mounting options and to support a 3-lug QD kit in 9mm via the booster piston housing.
- User serviceable: Yes.
- The .36 caliber bore provides maximum caliber flexibility, supporting rifle calibers from .22 up to .350 Legend and magnums including .338 Lapua Magnum, as well as pistol calibers up to 9mm.
- The Bushwhacker 36 is compatible with Griffin EZ-LOK™, GATE-LOK™, DUAL-LOK®, and Taper Mount systems including the TM Hammer Comp, Linear Comp, and all Griffin Taper Mounts with the appropriate PLAN-A™ adapter.
- Suppressor type: Hunting , Pistol , Rifle , Universal.
- The Bushwhacker 36 ships with the tube body, ECO-FLOW™ baffle system, .36 cal Ratchet-LOK™ end cap, PLAN-A™ Short Taper Mount HUB Adapter, booster piston housing (1.375×24), booster piston retainer, booster piston spring, two Bushwhacker wrenches, a Griffin multi-function wrench, and a suppressor pouch.
- Units transferred to a local dealer come standard with a 1/2×28 9mm Taper Mount EZ-Brake™; units purchased through the Silencers To Your Door Program™ allow selection of a specific EZ-Brake™ configuration.
- Users must use an end cap of equal or larger diameter than the bullet being fired; for example, a .30 cal cap is required for .300 Win Mag and 6.5 Creedmoor.
- Minimum barrel length ratings include: .300RUM/.338LM – 24″, .300WM – 20″, .308Win – 12.5″, .338 Federal – 12.5″, .350 Legend – 12.5″, 7.62×39 – 7.75″, 6.8 SPC – 8″, .300BLK – 7″, and 5.56mm – 9.5″.