FPM GunworksNein
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- TBAC Summit Tested
- Full-Auto Rated
length
7″
weight
14.6oz
MSRP
$449
length
7″
weight
14.6oz
calibers
5.56–9mm
material
Titanium · Steel
interface
HUB 1.375x24
MSRP
$449
- Overall length
- 7″
- Diameter
- 1.6″
- Weight
- 14.6 oz
- Material
- Stainless Steel / Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- MSRP
- $449
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Configurations
- Stainless Steel7″ · 14.6oz
- Titanium7″ · 9.4oz
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including FPM Gunworks Dirty Dachshund 5/8x24 Direct Thread Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. Nein was measured in 5 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Pistols
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- 9mm and 5.56 are Full Auto Rated.
- A 7-inch, fully welded multi-caliber suppressor built around 9mm but capable of running on a pistol, a carbine, or a short-barreled rifle.
- Threads 1-3/8"-24 for quick-attach mounts and booster devices using that same thread pitch.
- A 1/2"-28 direct thread adapter is included for direct attachment to your host.
Show all 5 ▾ ▴
- 5.56 has a 10.5" minimum barrel length; .308 has a 16" minimum barrel length and is semi-auto only.