Fox Creek ArmsFX338L-Ti
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Sealed
length
8.8″
weight
14.5oz
MSRP
$925
length
8.8″
weight
14.5oz
calibers
6.5–.338+
material
Titanium
interface
HUB 1.375x24
MSRP
$925
Photos
Image: Fox Creek Arms
- Overall length
- 8.8″
- Diameter
- 1.73″
- Weight
- 14.5 oz
- Material
- Titanium
- Max caliber
- .338 Cal / 8.6mm
- Base interface
- HUB 1.375x24
- Full-auto rated
- No
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $925
- Class
- Large Bore (.338+)
- n
- 99
- Range
- $499–$5,495
- Median
- $1,155
Cheaper than most Large Bore (.338+) suppressors
MSRP compared against the 99 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Fox Creek Arms Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Full auto rated: no.
- 2025 Silencer Summit results, host Savage 110 26" 300WM: ML 137.87 dBA, SE 126.82 dBA.
- 2025 Silencer Summit results, host AI-AX 20" 308: ML 132.95 dBA, SE 124.58 dBA.
- Made from lightweight titanium, this .338 suppressor is engineered to handle the .338 Lapua, the 8.6 Blackout and the 338 ARC, including subsonic use.
Show all 11 ▾ ▴
- Construction: precision machined, laser welded.
- HUB compatible: the 1-3/8x24 rear threads accept most standard direct thread mounts as well as QD mounts from other manufacturers, for example the Rearden Atlas and the Bravo ASR.
- For aftermarket mount options the maximum depth is 2" from the rear face of the suppressor to the blast baffle.
- Material: Titanium.
- Covered for life against workmanship defect and general use. Damage caused by failure to follow barrel restrictions, bore and caliber sizing, or cool down recommendations may be subject to the cost of the repair. Cosmetic damage such as paint failure due to heat, scratches and dings is not covered.
- This suppressor does not come standard with a direct thread mount.
- Barrel restrictions by model (NR = no restrictions, FA = full auto rated): 6.5cm 14.5", 7mm 22", .308 12", 300blk sub NR/FA, 300 blk super NR, 300 WM/Norma 22", 338 Lapua 22".