Fox Creek ArmsFX30SL-Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Sealed
length
9.1″
weight
14.5oz
MSRP
$950
length
9.1″
weight
14.5oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$950
Photos
Image: Fox Creek Arms
- Overall length
- 9.1″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.61″
- Weight
- 14.5 oz
- Material
- Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Fox Creek FX30
- Full-auto rated
- No
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $950
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fox Creek FX30
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Fox Creek Arms Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Full auto rated: no.
- The FX30SL-Ti is a 9" L-length titanium suppressor for high-pressure magnum cartridges up to .300 Norma.
- Construction: precision machined, laser welded.
- HUB compatible: the 1-3/8x24 rear threads accept most standard direct thread mounts as well as QD mounts from other manufacturers, for example the Rearden Atlas and the Bravo ASR.
Show all 10 ▾ ▴
- For aftermarket mount options the maximum depth is 2" from the rear face of the suppressor to the blast baffle.
- Removable end cap. Comes standard with a 30 cal end cap; 5.56/6mm and 6.5mm end caps are available as accessories.
- Features a 2" modular section that can be removed to reduce the overall length from the 9.1" full configuration to a 7" short configuration matching the FX30S.
- Material: Titanium.
- Covered for life against workmanship defect and general use. Damage caused by failure to follow barrel restrictions, bore and caliber sizing, or cool down recommendations may be subject to the cost of the repair. Cosmetic damage such as paint failure due to heat, scratches and dings is not covered.
- Comes with a 5/8x24 direct thread mount, and a 30 cal end cap as standard.