FOR SystemsRecce Ti
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
length
4.9″
weight
7.4oz
MSRP
$925
length
4.9″
weight
7.4oz
calibers
5.56 | 6.5
material
Titanium
interface
HUB 1.375x24
MSRP
$925
- Overall length
- 4.9″
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 3″–9.7″
- Median
- 6.2″
- Diameter
- 1.63″
- Weight
- 7.4 oz
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 4.4 oz–23.9 oz
- Median
- 12.45 oz
- Material
- Titanium
- Max caliber
- 6mm / .243
- Base interface
- HUB 1.375x24
- Full-auto rated
- No
- Barrel restriction
- 12.5" minimum
- MSRP
- $925
Shorter than most 6mm / 6.5mm suppressors
Length compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 6mm / 6.5mm suppressors
Weight compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including FOR Systems Corn Nut, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- PFM (Preferential Flow Management) baffle technology is incredibly efficient at suppressing sound while maintaining minimal back pressure.
- A venting array helps direct sound away from the shooter and bystanders behind the muzzle.
- Incredible flash suppression for a high-flow-rate design.
- DMLS manufacturing enables design elements not seen in other technologies, including an integral DMLS-printed flash-hider end cap.
Show all 6 ▾ ▴
- 1.375x24 HUB threads allow the user to run the mounting system of their choice; distance from shoulder to blast baffle is 1.55".
- NO FULL AUTO. Barrel minimums: 12.5" for 5.56mm, 6 Max and 6 ARC; 16" for 6mm Creedmoor and other short-action cartridges.