FOR SystemsRecce 718
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
length
4.9″
weight
13.6oz
length
4.9″
weight
13.6oz
calibers
5.56 | 6.5
material
Inconel
interface
HUB 1.375x24
- Overall length
- 4.9″
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 3″–9.7″
- Median
- 6.2″
- Diameter
- 1.63″
- Weight
- 13.6 oz
- Material
- Inconel 718
- Max caliber
- 6mm / .243
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Barrel restriction
- 7.5" minimum
- Firing schedule
- Be conservative and allow for cool-down every 270 rounds.
Shorter than most 6mm / 6.5mm suppressors
medianTHIS SUPPRESSOR · 4.9″
3″9.7″
Length compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including FOR Systems Corn Nut, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Full auto: be conservative and allow for cool down time every 270 rounds.
- PFM (Preferential Flow Management) baffle technology is incredibly efficient at suppressing sound while maintaining minimal back pressure.
- A venting array helps direct sound away from the shooter and bystanders behind the muzzle.
- Incredible flash suppression for a high-flow-rate design.
Show all 7 ▾ ▴
- DMLS manufacturing method allows for design elements not seen in other technologies.
- 718 Inconel allows for heavy abuse and a demanding firing schedule.
- Barrel minimums: 7.5" for 5.56, 10.5" for 6 Max and 6 ARC, 14.5" for 6mm Creedmoor and other short-action cartridges.