FN AmericaRush 9Ti
9mm / .36 Cal suppressor · FN Rush Mount interface · specs and compatibility from the manufacturer
Notable features
- Low Backpressure
- User Serviceable
length
7.3″
weight
10.8oz
MSRP
$859
length
7.3″
weight
10.8oz
calibers
9mm
material
Titanium · Steel · Aluminum
interface
FN Rush Mount
MSRP
$859
- Overall length
- 7.3″
- Diameter
- 1.38″
- Weight
- 10.8 oz
- Material
- Titanium / Stainless Steel / Aluminum
- Finish / treatment
- High-Temp Cerakote, Black, Flat Dark Earth
- Max caliber
- 9mm
- Base interface
- FN Rush Mount
- Backpressure
- Low
- Maintenance
- User serviceable
- MSRP
- $859
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- FN Rush Mount
This suppressor uses FN America's proprietary FN Rush Mount: 6 mounts in our catalog fit it, all from FN America, and 30 muzzle devices that feed it. Plan on buying mounting hardware from FN America.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- The published weight of 10.8 oz. is without the piston.
- With the advanced booster assembly, mounting the FN Rush 9Ti to any pistol barrel threaded 1/2" x 28 is fast and repeatable.
- A tight piston gas seal contains carbon fouling in the baffle core, cutting blowback and recoil.
- The 1.375" tube clears suppressor-height iron sights.
Show all 16 ▾ ▴
- The advanced booster maintains slide timing, preventing cycle failures.
- Breaks down easily for maintenance with a user-serviceable baffle stack.
- Titanium hybrid construction with a ported aluminium baffle stack.
- Materials are titanium, stainless steel and aluminum, with an HT Cerakote finish.
- Reduced recoil and low back pressure preserves host pistol and suppressor life span.
- Carries a limited lifetime warranty and is designed for high-cycle counts.
- A highly versatile and reliable 9mm suppressor; paired with the FN 509 Tactical it gives reliable feeding and extraction with most common ammunition types.
- Designed to function with centerfire pistol ammunition using a traditional bullet; exotic projectiles such as incendiary rounds, tracers or snake shot should not be used.
- Includes a 1/2" x 28 TPI piston, booster assembly, end cap and front cap assembly tool, premium storage case and owner's manual reference card.
- Do not use +P+ ammunition with the FN Rush; it may develop chamber pressure in excess of industry standards.
- Do not use ammunition specifically intended for use in submachine guns or rifles, as chamber pressure may reach or exceed the pressure developed by proof loads.
- While tested with +P ammunition, the higher pressures generated will accelerate wear of the pistol and suppressor and should be used sparingly.