FN AmericaQD762
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- Multi-Caliber
- Full-Auto Rated
length
8.1″
weight
21oz
MSRP
$1,399
length
8.1″
weight
21oz
calibers
5.56–.30
material
Steel · Inconel
interface
HUB 1.375x24
MSRP
$1,399
- Overall length
- 8.1″
- Diameter
- 1.62″
- Weight
- 21 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Inconel / Stainless Steel
- Finish / treatment
- Cerakote C-Series, Black, Flat Dark Earth
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Backpressure
- Low
- Full-auto rated
- Yes
- MSRP
- $1,399
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Full-auto certified, exceeding the USSOCOM SURG requirements for durability and reliability under fully automatic fire; tested with a 13in. barrel.
- Suppresses a wide range of calibers: 7.62 NATO (.308), 7.62x39, 6.5 CM, .300 BLK and .300 Magnum.
- Testing with the FN SCAR series resulted in less than 1 MOA of impact (POI) shift.
- Sound suppression of 145 decibels, measured on a 16" barrel.
Show all 14 ▾ ▴
- An innovative low backpressure, forward-venting suppressor that reduces recoil and gas blowback while maintaining accuracy.
- The versatile design allows for direct thread or quick detach FN mount implementation and is HUB compatible.
- Reliable feed and extraction with factory ammunition.
- 3D-printed from Inconel superalloy with a stainless-steel blast chamber.
- Finished in high temperature C-Series CERAKOTE.
- Tested to 10,000 rounds.
- Designed to enhance the performance of the next generation of SCAR series and other 7.62 rifles, particularly the SCAR 17S and SCAR 20S.
- Every QD series suppressor comes with mount pre-installed and 1.25-inch open end wrench and spanner wrench.
- The pre-installed mount can be chosen from a muzzle brake or a flash hider.
- QD Mount SKUs include muzzle brake and shim kit.