ECCO MachineTLX 9mm
9mm / .36 Cal suppressor · ECCO Booster interface · specs and compatibility from the manufacturer
Notable features
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
length
6.5″
weight
4.3oz
MSRP
$589
length
6.5″
weight
4.3oz
calibers
9mm
material
Titanium
interface
ECCO Booster
MSRP
$589
- Overall length
- 6.5″
- Diameter
- 1.3″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 1″–2″
- Median
- 1.5″
- Weight
- 4.3 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- Grade 5 Titanium
- Finish / treatment
- Moly Resin
- Max caliber
- 9mm
- Base interface
- ECCO Booster
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $589
- Class
- 9mm / .36 Cal
- n
- 176
- Range
- $260–$2,888
- Median
- $802
Narrower than most 9mm / .36 Cal suppressors
Diameter compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 9mm / .36 Cal suppressors
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 9mm / .36 Cal suppressors
MSRP compared against the 176 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: ECCO Booster. Nothing in the catalog attaches to it yet; check with the manufacturer for the hardware it takes.
The Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. TLX 9mm was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Approximately 32 dB for the 6.5″ model; ~29 dB for the 5.5″ variant
- Full Auto Rated: Yes, keep suppressor under 800°F
- Reaches 800°F very quickly with rifle rounds
- 5.56 use requires a 16″+ barrel and a sustained rate not exceeding two rounds per minute
Show all 21 ▾ ▴
- Use of cast lead bullets is not recommended with sealed suppressors
- Features a SOCOM Black Moly Resin finish.
- Uses a direct thread 1/2x28 mount system.
- Fully welded 10 baffle tubeless suppressor
- Can operate on locked breech pistols without a booster
- Alpha pattern threads in the rear will accept 1.125-28 threaded mounts
- Constructed from 6Al-4V titanium, a high-strength alloy suited for suppressor applications.
- Made from 6Al-4V grade 5 titanium; mount is 7075-T651 aluminum
- Optimized for 9mm pistols and subguns.
- Hammer fired hosts tend to be more tolerant of the added mass of the TLX than striker fired hosts.
- Some striker fired pistols have been reliable with the TLX using common 147 gr. 9mm ball ammunition.
- Torture tested with back-to-back-to-back magazine dumps on 900+ RPM sub machine guns
- Not recommended for the Sig P320, S&W Shield EZ .380, or S&W M&P Shield 9
- Includes a direct thread 1/2x28 mount in the box.
- Industry standard suggests 4-5 ounces is the approximate weight limit for a suppressor on most locked breech handguns to cycle reliably without a recoil booster.
- Some pistols may require more energetic loads when using a rigid mounted suppressor, and some hosts may not cycle reliably suppressed regardless of booster use.
- Some pistols may still require the Alpha booster assembly to cycle properly with the TLX.