ECCO MachineTLX 45
.45 / .46 Cal suppressor · ECCO Booster interface · specs and compatibility from the manufacturer
Notable features
- Full-Auto Rated
- Sealed
length
6.5″
weight
4.1oz
MSRP
$589
length
6.5″
weight
4.1oz
calibers
.45
material
Titanium
interface
ECCO Booster
MSRP
$589
- Overall length
- 6.5″
- Class
- .45 / .46 Cal
- n
- 105
- Range
- 3.84″–11.25″
- Median
- 8″
- Diameter
- 1.3″
- Class
- .45 / .46 Cal
- n
- 105
- Range
- 1.3″–2.5″
- Median
- 1.5″
- Weight
- 4.1 oz
- Class
- .45 / .46 Cal
- n
- 105
- Range
- 4.1 oz–48.2 oz
- Median
- 12 oz
- Material
- Grade 5 Titanium
- Max caliber
- .45 ACP
- Base interface
- ECCO Booster
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $589
- Class
- .45 / .46 Cal
- n
- 99
- Range
- $260–$1,515
- Median
- $850
Shorter than most .45 / .46 Cal suppressors
Length compared against the 105 .45 / .46 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most .45 / .46 Cal suppressors
Diameter compared against the 105 .45 / .46 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .45 / .46 Cal suppressors
Weight compared against the 105 .45 / .46 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .45 / .46 Cal suppressors
MSRP compared against the 99 .45 / .46 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: ECCO Booster. Nothing in the catalog attaches to it yet; check with the manufacturer for the hardware it takes.
Manufacturer claim
- Approximately 32 dB for the 6.5″ model; ~29 dB for the 5.5″ variant
- Full Auto Rated: Yes, keep suppressor under 800°F
- Reaches 800°F very quickly with rifle rounds
- 5.56 use requires a 16″+ barrel and a sustained rate not exceeding two rounds per minute
Show all 11 ▾ ▴
- Use of cast lead bullets is not recommended with sealed suppressors
- Fully welded 10 baffle tubeless suppressor
- Can operate on locked breech pistols without a booster
- Alpha pattern threads in the rear will accept 1.125-28 threaded mounts
- Made from 6Al-4V grade 5 titanium; mount is 7075-T651 aluminum
- Torture tested with back-to-back-to-back magazine dumps on 900+ RPM sub machine guns
- Not recommended for the Sig P320, S&W Shield EZ .380, or S&W M&P Shield 9