ECCO MachineAccipiter-Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
length
6.5″
weight
8.5oz
MSRP
$995
length
6.5″
weight
8.5oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$995
- Overall length
- 6.5″
- Diameter
- 1.5″
- Weight
- 8.5 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Grade 5 Titanium
- Finish / treatment
- Moly Resin
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- Barrel restriction
- 10" minimum
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $995
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. Accipiter-Ti was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Rated for: .224 to .458, .30 standard
- Rated for: .300 RUM in .30 cal
- Full Auto Rated: Yes
- Suppression: length dependent, from ~30 to >35 dBA
Show all 13 ▾ ▴
- User Serviceable: No
- Muzzle brake muzzle device STRONGLY recommended for barrels shorter than 12″
- Baffle erosion is not a warranty item
- Features our unique baffle arrangement and carefully developed mating surfaces
- Extreme strength and excellent suppression of high velocity rifle rounds
- Rated for cartridges up to and including the Remington Ultra Mags and .338 Lapua magnum
- Also a solid performer with subsonic rounds, though it was not optimized for them
- Constructed entirely of 6Al-4V titanium, the fusion TIG welded tubeless design
- Titanium suppressors must be kept under 800°F in atmosphere to prevent embrittlement
Unattributed
- 2024 Silencer Summit result — 8″ Accipiter .30 cal: 135.2 dBA at muzzle / 127.4 dBA at shooter's ear, tested on a 20″ .308 bolt action.
- 2024 Silencer Summit result — 9″ Accipiter .30 cal: 132.9 dBA at muzzle / 126.3 dBA at shooter's ear, tested on a 20″ .308 bolt action.
- 2024 Silencer Summit result — 9″ Accipiter .375 cal: 143.7 dBA at muzzle / 133.6 dBA at shooter's ear, tested on a 26″ .375 RUM bolt action.
- Suppression range is length-dependent, from approximately 30 to greater than 35 dBA reduction.
Show all 18 ▾ ▴
- Constructed entirely of 6Al-4V titanium with a fusion TIG welded tubeless design featuring a unique baffle arrangement and carefully developed mating surfaces for extreme strength.
- Standard configuration uses 1.375-24 Bravo pattern threads, making it compatible with popular mounting system adapters (e.g., H.U.B., ASR).
- Excellent suppression of high velocity rifle rounds, up to and including Remington Ultra Mags and .338 Lapua Magnum.
- Also a solid performer with subsonic rounds, though not optimized for them.
- Rated for .300 RUM in .30 cal and is Full Auto rated.
- Muzzle brake muzzle device is STRONGLY recommended for barrels shorter than 12″ when firing high velocity rounds.
- Titanium suppressors must be kept under 800°F in atmosphere to prevent embrittlement.
- User is NOT serviceable — fully welded, no disassembly.
- Offered standard with no mount included, catering to customers who wish to run a mounting system other than those offered by ECCO Machine. Direct thread mounts or taper mount adapters can be bundled at a discounted price.
- Build materials: 6Al-4V Titanium, fully welded tubeless design.
- Available in multiple Moly Resin color finishes: Foliage Green, Light Grey Flat, Burnt Bronze, Coyote Brown, Tan FDE, SOCOM Black, Grey-Black Colt Flat, OD Green, Flat Brown, and Clear. Non-black colors add 5–10 days to ship time.
- Baffle erosion is explicitly stated as NOT a warranty item.
- Titanium construction must remain under 800°F in atmosphere to prevent embrittlement — a key thermal durability constraint.
- No mount is included as standard. Direct thread mounts or taper mount adapters and brakes can be packaged with suppressor purchase at a lower combined price point than when purchased individually (combination discount does not auto-apply; customer must contact ECCO Machine, valid for 30 days post-purchase, retail customers only).